Installation Instructions

How Does the Cool Bed III™ work?
Unlike a fluffy dog bed that is designed to retain heat to keep a dog warm, the Cool Bed III is designed
to radiate heat back into the air or the floor surface to keep a dog cool. The water-saturated Cool
Core™ inside the Cool Bed III absorbs the dog’s natural body temperature of 102º Fahrenheit and
coverts it to room temperature, which is normally well below the dog’s body temperature. The
difference created between the room temperature and the dog’s body temperature is how the Cool Bed
III provides a cooler, refreshing surface for your dog. Even if it is 80ºF in your house, the Cool Bed III
is 22º cooler than a dog’s 102º body temperature. The Cool Bed III provides a permanent, natural,
“cool” spot for your dog, inside or outside in temperatures under 95º Fahrenheit without chemicals or
electricity.
Precautions:
♦Have your dog’s nails routinely trimmed to prevent accidental punctures.
♦Cool Bed should be placed on a smooth surface that cannot cause punctures, abrasions or leakage.
♦Routinely check under your Cool Bed III for moisture.
♦The surface can be cleaned using a damp towel or sponge and mild dishwashing detergent. Do not wash in
a washing machine.
♦Never use the Cool Bed III in direct sunlight. Always place in shade, as direct sun will warm the Cool Bed
III.
♦Always place the Cool Bed III out of the way of foot traffic.
♦Never allow the Cool Bed III to freeze.
♦Cool Bed III is not intended to be a life saving device.
♦This product is to be used in temperatures under 95° Fahrenheit
How to use your new Cool Bed III™
The best results will be obtained when used in a shady area. When using outdoors, always place the Cool
Bed III in a shady, cool spot, as this will maximize its heat wicking abilities. Be sure not to place the bed
on sharp objects that could puncture the Cool Bed III. Keeping the Cool Bed III indoors overnight near
air conditioning will super cool the bed for outdoor use the next morning. When using indoors, be sure to
place the Cool Bed III out of direct sunlight. The cooler the spot you place the Cool Bed III, the better.
An ideal place would be a cool tile, linoleum or concrete floor. An area with good air movement will also
help keep the bed cooler. You will soon figure out the best location for your new Cool Bed III, and your
pet will love you for it!
K&H Limited Two Year Warranty
Our warranty is as follows: K&H Manufacturing warrants to the original consumer, that this
product will be free of defects and workmanship for a period of two years from the date of
purchase. The manufacturer's liability hereunder is limited to replacement of the product. This
warranty is void if the product has been damaged by accident, unreasonable use, neglect,
tampering, or other causes not arising from defects in material or workmanship.
To exercise your warranty: If, during the warranty period, your product malfunctions,
return the product, postage prepaid, to K&H Manufacturing, with dated proof of
purchase or original date receipt. A return authorization number, obtained by calling
[phone] must accompany all returns to manufacturer. Please include a note
explaining the problem when returning the product.