Datasheet

128128 www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 10/2016
Accessories Dimensions in mm [inch] Order no.
8-pin connector
7-pin connector
5-pin connector
1 ... 8, pitch 3.81 N100498
9 ... 15 (for 923 / 924), pitch 5.08 N100548u002
9 ... 15 (for 924-4 / 924-6), pitch 5.08 N100400u002
16 ... 20, pitch 3.81 N100399u002
Replacement parts Order no.
Suitable gaskets, other accessories and installation examples for optional accessories can be found in chapter Accessories or in the Accessories section under: www.kuebler.com/accessories.
Sealing cover type K2, IP65
suitable for front bezel 75 x 60 [2.95 x 2.36]
with screw mounting transparent/black G008303
Transparent cover, IP65
for cut-out 50 x 50 [1.97 x 1.97], with screw mounting for counters with lockable G008143
cut-out 45 x 45 [1.77 x 1.77] and front bezel 48 x 48 [1.89 x 1.89] key lockable G008153
Adapter front bezel, 72 x 72 mm [2.83 x 2.83]
for cut-out 68 x 68 [2.68 x 2.68] to cut-out 45 x 45 [1.77 x 1.77]
(mating clip T009420 must be ordered separately) black T008177
mating clip T009420
Adapter front bezel, 55 x 55 [2.17 x 2.17]
for cut-out 50 x 50 [1.97 x 1.97] to cut-out 45 x 45 [1.77 x 1.77]
with clip mounting for counters 48 x 48 [1.89 x 1.89] black T008853
Gasket 58 x 58 [2.28 x 2.28] , for cut-out 50.2 x 50.2 [1.98 x 1.98] N511004
Adapter front bezel, 60 x 75 [2.36 x 2.95]
for cut-out 50 x 50 [1.97 x 1.97] to cut-out 45 x 45 [1.77 x 1.77]
with screw mounting for counters 48 x 48 [1.89 x 1.89] black T008860
gasket 60 x 75 [2.36 x 2.95] for cut-out 50 x 50 [1.97 x 1.97] N511020
Mounting frame
with cut-out 50 x 50 [2.36 x 2.36]
via separate adapter also for 45 x 45 [1.77 x 1.77]
for snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 48 x 48 m [1.89 x 1.89], 53 x 53 [2.09 x 2.09]
and 55 x 55 [2.17 x 2.17]
chromated G300003
Sensor power supply AC (50/60 Hz) 100 ... 240 V AC, ±10 %, max. 9.5 VA
24 V AC ±10 %, max. 6 VA
DC 10 ... 30 V , max. 5.0 W
External fuse protection 100 ... 240 V AC T 0.1 A
24 V AC T 0.315 A
10 ... 30 V DC T 0.2 A
Data retention > 10 years, EEPROM
Input modes pulse counters: Count direction (cnt.dir),
Difference (up.dn),
Addition A+B (up.up),
phase discriminator x1,
x2, x4 (quad, quad x2, quad x4),
Ratio (A/B),
Ratio in % ((A-B)/A x100%)
frequency meter : A, A-B, A+B quad,
A/B, (A-B)/A x 100 %
timer: 4 Start modes: FrErun,
Auto, InpA.InpB., InpB.InpB.
Sensor power supply AC supply 24 V DC ±15 %, 80 mA
DC supply max. 80 mA,
external power supply is
connected through
EMC standards EN55011 class B,
EN 61000-6-2, EN 61000-6-3
Device safety designed to EN61010 part 1
protection class 2
application area pollution level 2
UL approval file E128604
Electrical characteristics
Display 2 line 2 x 6 digits LCD display
standard positive green with optional
backlighting
LED look negative red backlighting
multicolor upper line negative, red backlighting
lower line negative, red or green
backlighting
(programmable)
Operating temperature -20°C ... +65°C [-4°F ... +149°F]
(non-condensing)
Storage temperature -25°C ... +75°C [-13°F ... +167°F]
Humidity at +40°C [+104°F] RH 93 % (non-condensing)
Altitude up to 2000 m [6562‘]
Protection IP65 (front side)
Weight approx. 125 g [4.41 oz]
General technical data
Mechanical characteristics
Preset counters, electronic
Technical data
LCD preset counters Codix 923 / 924Multifunctional – pulse, frequency, time – 1...6 presets (AC+DC)