Datasheet
304
RoHS
6 LEDs
AC
100 ... 240 V
DC
10 ... 30 V
mA, V
000000
DIN 96 x 48
000000
Tara
∑
min / max
AC/DC
15 bit
- 20° + 65°
mV
© Fritz Kübler GmbH, subject to errors and changes. 10/2016www.kuebler.com
Strain-gauge controllers
LED strain-gauge controllers
The process controller Codix 566 with totalizer function displays
measured values from all common strain-gauge inputs in high
resolution. In addition it can monitor and control 2 limit values.
These fast displays set new standards when it comes to user
friendliness. Their easy-to-read 14-segment LED display, easy-
to-understand running help texts and a practical quick-start
guide eliminate the need to wade through time-consuming full
instruction manuals.
With optional analog output.
Power supply Menu-driven
programming
14-segment
LED display
Display
linearization
Order code
Galvanic
isolation
Temperature
range
Tare function
Resolution DIN front bezel
Min / Max
value detection
Installation in
mosaic systems
Operation
with gloves
Totalizer
function
Strain-gauge
input
2 limit values
User-friendly
• Practical quick-start guide for setting the parameters and
operating the device.
• Help text as running text.
• Easy-to-read 14-segment LED, 6-digit display, 14 mm high.
• Simple programming via 4 keys on the front.
• One front key as well as 2 additional inputs can be programmed
for specific applications.
• Customer-specific characteristic (linearization) curve via
12 control points for all measurement signal inputs.
• MIN/MAX memory function, individually resettable.
Powerful
• Sampling rate of 10 readings per second.
• Application-specific characteristic curves via 12 measure-
ment points.
• Manual totalizer function for totalizing the measured values.
Can be reset separately.
• 2 relay outputs (changeover contacts) for limit monitoring
with hysteresis and ON/OFF delay function for current
measured or totalizer values.
• Analog output for the current measured value, MIN-value,
MAX-value or totalizer value.
• Auxiliary sensor power supply 10 V DC / 30 mA for powering
350 Ω bridges.
• Inputs and outputs galvanically isolated.
• Digital filter (first-order) for smoothing display fluctuation with
unstable input signals.
• Tare function.
a
Input type
6 = Strain-gauge inputs
1)
b
Outputs
0 = relays
1)
c
Power supply
0 = 100 ... 240 V AC, ±10 %
1)
3 = 10 ... 30 V DC
1)
d
Further outputs (optional)
0 = none
1)
9 = analog output
1)
(only for DC version)
Delivery specification:
· Process device
· Mounting clip
· Gasket
· Instruction manual, multilingual
· 1 sheet of self-adhesive symbols
· Quick-start guide
Practical quick-start guide for
setting the parameters and
operating the device.
The guide can be affixed directly
to the front of the unit and can
be removed and re-applied as
required.
Analog
output
optional
6.56 . 06 1 0 . X 0 X
a b c d
Codix 566For strain-gauge inputs (AC+DC)
1) Stock types.