Datasheet

162 www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 10/2016
Hour meters / timers, electronic
Display LCD, 8-digits, 8 mm [0.31“] high
Backlighting external electrical source
24 V DC ±20 %, 50 mA
Counting direction adding
Display range see next page
Reset manual and electrical
Working temperature -10°C ... +55°C [+14°F ... +131°F]
(non-condensing)
Operating temperature -10°C ... +60°C [+14°F ... +140°F]
(non-condensing)
Storage temperature -20°C ... +70°C [-4°F ... +158°F]
Altitude up to 2000 m
Housing dark grey RAL 7021
Protection IP65 (front side)
Weight approx. 50 g [1.76 oz]
Power supply internal lithium battery
approx. 8 years at 20°C [68°F]
EMC standards EN 55011 class B
EN 61000-6-2, EN 61000-6-3
Device safety Designed to EN 61010 part 1
Protection class 2
Application area pollution level 2
UL approval file E128604
A. Timer inputs DC versions (max. 30 V DC) INP B
Timer input NPN or PNP depending on the type (see table)
Switching level NPN LOW: 0 ... 0.7 V DC
HIGH: 3 ... 30 V DC
PNP LOW: 0 ... 0.7 V DC
HIGH: 4 ... 30 V DC
Counting start NPN for LOW signal at the timer input
PNP for HIGH signal at the timer input
B. Timer inputs high voltage versions (10 ... 260 V DC/V AC) INP A
Timer input optocoupler input
Min. pulse time 16 ms
Switching level LOW: 0 ... 2 V DC/V AC
HIGH: 10 ... 260 V DC/V AC
Counting start for HIGH signal at the timer input
C. Time range change (Mode)
Contact input open collector (switching at 0 V)
NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 5 V DC
Time range d epending on the circuit (s. order inform.)
D. Reset input for DC and high voltage
Min. pulse time DC 50 ms
High voltage 16 ms
Contact input DC NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 30 V DC
High voltage input 10 ... 260 V AC/DC
E. Reset locking input (for DC and AC)
Electrical reset key locking
Input not active reset key locked
Contact input open collector NPN
(switching at 0 V)
Switching level NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 5 V DC
General technical data
Technical data
Mechanical characteristics
Count input
Electrical characteristics
Codix 135 Max. time range 9999 h 59 min 59 sec or 9999999.9 sec LCD hour meters
Transparent cover, lockable, IP65
Sealing cover type K1, IP65
For cut-out 54 x 29 [2.13 x 1.14], for screw mounting to front bezel F1B or
adapter front bezel N003001,
for counters with cut-out 50 x 25 [1.97 x 0.98] or 45 x 22.2 [1.77 x 0.87]
N003002
Suitable for front bezel 60 x 50 [2.36 x 1.97], for screw mounting of electromech.
counters and via adapter front bezel N003001 for counters 48 x 24 [1.89 x 0.94] G008301
Adapter front bezel, 72 x 36 [2.83 x 1.42]
Adapter front bezel, 48 x 48 [1.89 x 1.89]
Adapter front bezel, 60 x 50 [2.36 x 1.97]
For cut-out 68 x 33 [2.68 x 1.30] to cut-out 45 x 22.2 [1.77 x 0.87],
for counters 48 x 24 [1.89 x 0.94], as set black and silver anodised 162704 Set
For cut-out 45 x 45 [1.77 x 1.77] to cut-out 45 x 22.2 [1.77 x 0.87],
with clip mounting for counters 48 x 24 [1.89 x 0.94] black T008883
For cut-out 54 x 29 [2.13 x 1.14] to cut-out 45 x 22.2 [1.77 x 0.87],
with screw mounting and gasket for counters 48 x 24 [1.89 x 0.94] black N003001
Mounting frame
with cut-out 50 x 25 [2.36 x 1.97]
via separate adapter also for 45 x 22.2 [1.77 x 0.87]
For snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 53 x 28 [2.09 x 1.10]
and via separate adapter (T008180) for counters 48 x 24 [1.89 x 0.94] chromated G300004
Accessories Dimensions in mm [inch] Order no.
Suitable gaskets, other accessories and installation examples for optional accessories can be found in chapter accessories or in the accessories section under: www.kuebler.com/accessories.