User's Manual
Table Of Contents
- 1. Introduction
- System Basic Features
- Technological Characteristics
- 4. Product Overview
- 5. Interface
- 6. Environmental Condition
- 7. Software Installation
- 8. Arbeit NMS software
- _
- 8.3.1 IDU Setting
- 8.3.2 ODU Setting
- 8.3.3 Alarm Setting
- 8.3.4 Cross Connecting
- 8.3.5 User I/O Setting
- 8.5.1 Background Setting
- 8.5.2 COM port Setting
- 8.5.3 Record Saving Time
- Local Loopback
- IF Loopback
- RF Loopback
- Remote Loopback
- PRBS Test
- 8.8.1 Alarm Record
- 8.8.2 Login Record
- 8.9.1 Help Window
- 8.9.2 About Arbeit
- 8.10.1 Network Monitor
- 8.10.2 Real-time Alarm
- _
- Appendix A: Technical Specifications
- Appendix B: LCD Alarm Description
- Appendix C: LCD Display＆Function Table
- Appendix D: Frequency Spread Spectrum
- Appendix E: 5.8GHz ODU Block Diagram
- Appendix F: ODU Installation Guide
- Appendix G: RSL Calculation and Link Budget
- Appendix H: Arbeit Network Management System Tree
- Appendix I: Arbeit NMS Alarm
- Appendix J: ODU Troubleshooting Guide
- Appendix K: Antenna
5.8GHz PDH User’s Manual
73
Service Channel
Frequency 300-3400Hz
Impedance 600 ohm balance
Telephone
Interface RJ-11
Bit Rate
9600 baud
Protocol
RS-232
Monitoring Data
(PC)
Interface
RJ-45
Bit Rate
9600 baud
Protocol
RS-232
Computer Data
(USER)
Interface
DB-25
Type
Photo-coupled (TTL)
Interface
DB-25
Number
8
Isolation
3000 VAC (rms)
User Input
LED Power Dissipation
90 mW
Type
Relay output
Interface
DB-25
Number
4
Max. switching voltage
125 VAC / 60 VDC
User Output
Max. switching current
1 A
Power
DC Input
DC -48VDC (-36~ -72V)
Power Consumption
< 45 watts
AC Input (optional)
220 VAC (100-250V) 50-60Hz
Connector
Barrier strip, plug-in type