User's Manual
Table Of Contents
- 1. Introduction
- System Basic Features
- Technological Characteristics
- 4. Product Overview
- 5. Interface
- 6. Environmental Condition
- 7. Software Installation
- 8. Arbeit NMS software
- _
- 8.3.1 IDU Setting
- 8.3.2 ODU Setting
- 8.3.3 Alarm Setting
- 8.3.4 Cross Connecting
- 8.3.5 User I/O Setting
- 8.5.1 Background Setting
- 8.5.2 COM port Setting
- 8.5.3 Record Saving Time
- Local Loopback
- IF Loopback
- RF Loopback
- Remote Loopback
- PRBS Test
- 8.8.1 Alarm Record
- 8.8.2 Login Record
- 8.9.1 Help Window
- 8.9.2 About Arbeit
- 8.10.1 Network Monitor
- 8.10.2 Real-time Alarm
- _
- Appendix A: Technical Specifications
- Appendix B: LCD Alarm Description
- Appendix C: LCD Display＆Function Table
- Appendix D: Frequency Spread Spectrum
- Appendix E: 5.8GHz ODU Block Diagram
- Appendix F: ODU Installation Guide
- Appendix G: RSL Calculation and Link Budget
- Appendix H: Arbeit Network Management System Tree
- Appendix I: Arbeit NMS Alarm
- Appendix J: ODU Troubleshooting Guide
- Appendix K: Antenna
5.8GHz PDH User’s Manual
67
Select the Equipment Setting tab beside the Information tab, it will show the following
information：
Equipment Setting
Status Description
IDU Sn IDU serial number
DSC No Digital service telephone number
Code Format of Traffic E1 encoding type
A.T.P.C. Automatic power control (retain)
Expected RSL
Automatic power setup parameter (retain）
ODU Sn ODU serial number
RF Channel No. RF signal channel
Transmit signal Level ODU transmitting power setup
Transmit Frequency ODU transmitting frequency
Receive Frequency ODU receiving frequency
IDU temperature alarm threshold (℃)
IDU temperature alarm
ODU temperature alarm threshold (℃)
ODU temperature alarm