User's Manual
Table Of Contents
- 1. Introduction
- System Basic Features
- Technological Characteristics
- 4. Product Overview
- 5. Interface
- 6. Environmental Condition
- 7. Software Installation
- 8. Arbeit NMS software
- _
- 8.3.1 IDU Setting
- 8.3.2 ODU Setting
- 8.3.3 Alarm Setting
- 8.3.4 Cross Connecting
- 8.3.5 User I/O Setting
- 8.5.1 Background Setting
- 8.5.2 COM port Setting
- 8.5.3 Record Saving Time
- Local Loopback
- IF Loopback
- RF Loopback
- Remote Loopback
- PRBS Test
- 8.8.1 Alarm Record
- 8.8.2 Login Record
- 8.9.1 Help Window
- 8.9.2 About Arbeit
- 8.10.1 Network Monitor
- 8.10.2 Real-time Alarm
- _
- Appendix A: Technical Specifications
- Appendix B: LCD Alarm Description
- Appendix C: LCD Display&Function Table
- Appendix D: Frequency Spread Spectrum
- Appendix E: 5.8GHz ODU Block Diagram
- Appendix F: ODU Installation Guide
- Appendix G: RSL Calculation and Link Budget
- Appendix H: Arbeit Network Management System Tree
- Appendix I: Arbeit NMS Alarm
- Appendix J: ODU Troubleshooting Guide
- Appendix K: Antenna
5.8GHz PDH User’s Manual
10
DB-25 Description DB-25 Description
1 Input 1 14 Shield Ground
2 Input 3 15 Input 2
3 Input 5 16 Input 4
4 Input 7 17 Input 6
5 Shield Ground 18 Input 8
6 Shield Ground 19 Shield Ground
7 Output 1 C 20 Output 1 NC
8 Output 1 NO 21 Output 2 C
9 Output 2 NC 22 Output 2 NO
10 Output 3 C 23 Output 3 NC
11 Output 3 NO 24 Output 4 C
12 Output 4 NO 25 Output 4 NC
13 Shield Ground
K. Grounding connection
L. Safety Wires 250V/2A
M. Power Switch
N. Power Input Port: -48V/1A DC
E1 Modem Power Terminal Connection to Power Terminal
( white black -
;
red + )
E1 Modem
with
connection