User's Manual

essid “Your Network” command will set the ESSID as Your Network. Remember that, a
'save' command is required for changes to take effect. Always reset your ODU with the
“reset” command.
The following is a list of parameters you can make changes on the ODU.
Parameter Description Default Value
apname A textual name for the identification of the ODU.
apXXXXXX
(where XXXXXX is the last
six octets of ODU’s MAC
address)
web_port Port number dedicated to WEB
80
telnet_port Port number dedicated to Telnet
23
mode Operation mode of the ODU
PxP
channel The radio channel number.
1
essid The ESS ID (a.k.a., SSID) of the ODU.
My Network
tx_rate Transmission Rate
Auto
tx_retry Number of retries for data transmission
7
rts_threshold The threshold (number of bytes) for enabling
RTS/CTS handshake. Data with its frame size
larger than this value will perform the RTS/CTS
handshake. Range of value: 0~2432.
2432
frag_threshold The threshold (number of bytes) for the
fragmentation boundary. Data will be transmitted
in fragments which its size does not exceed this
value. Range of value: 256~2432.
2432
ip_address The IP address of the ODU.
192.168.1.1
ip_netmask The subnet mask address of the ODU.
255.255.255.0
ip_gateway The default gateway address of the ODU.
192.168.1.254