User's Manual

2-4 Hardware Installation
Take the following steps to set up your ODU.
 Connect the Ethernet Cable
The 11Mbps Wireless LAN ODU supports 10/100M Ethernet connection. Connect the
SFTP cable from the ODU to the RJ-45 connector of PoE (marked “To ODU”) for ODU
connection. Then connect the other end of the POE with straight RJ-45 cable to a hub or a
switch. Please note that, use the cross-over cable when you desire to connect the PoE
of ODU to a PC.
 Connect the Antenna
In ODU connection, you can connect antenna to the N-type connector of ODU by RF
cable.
 Connect the Power Cable
Connect DC 15V adapter to the PoE, and plug the other end of the adapter into an
electrical outlet.
NOTE: Only use the power adapter supplied with the PoE of ODU. Otherwise, the product
may be damaged.