User's Manual

2-4 Hardware Installation
Take the following steps to set up your ODU.
n Connect the Ethernet Cable
The 11Mbps Wireless LAN ODU supports 10/100M Ethernet connection. Connect the
SFTP cable from the ODU to the RJ-45 connector of PoE (marked “To ODU”) for ODU
connection. Then connect the other end of the POE with straight RJ-45 cable to a hub or a
switch. Please note that, use the cross-over cable when you desire to connect the PoE
of ODU to a PC.
n Connect the Power Cable
Connect DC 12V adapter to the PoE, and plug the other end of the adapter into an
electrical outlet.
NOTE: Only use the power adapter supplied with the PoE of ODU. Otherwise, the product
may be damaged.