User's Manual

Configuration
E1 Spread Spectrum Radios
7-4
Figure 7-6 Configuration Process of HyperTerminal (1)
 STEP2: Fill in the connection name in the column. Then press “OK” to continue.
Figure 7-7 Configuration Process of HyperTerminal (2)
 STEP3: Choose the item of “connect using” to be TCP/IP(Winsock)”.
Figure 7-8 Configuration Process of HyperTerminal (3)
 STEP4: Fill in the IP address of the ETH port. The port number left to be default value of 23. Then press “OK”.