User's Manual

Textmenu Details
E1 Spread Spectrum Radios
8-25
8.5 Update Standby Configuration
Figure 8-39 Update Standby Configuration
This item is to write configuration into system flash. If this action is not implemented, you will lose you
configuration after you restart system. This item is only for network setting.
8.6 Restart
Figure 8-40 Restart
In this page, you could restart the system. During restart process, E1 and data communication operation will
not be influenced. Any change or setup of items in the network pages should be restart to take configuration
into effect.
9 In the process of restarting, E1 and data transmission would not be affected.