User's Manual

Textmenu Details
E1 Spread Spectrum Radios
8-7
Active IP: This item displays the current IP address and subnet mask. After PPP is connected, the
corresponding IP addresses will be shown in this window.
8.1.7 IP Forwarding
Figure 8-9 IP Forwarding
In this subpage, you could setup IP forwarding configurations.
IP Forwarding: Whether IP packet is forwarding. When selected “Forwarding” and connection is established
with other equipments, the IP packet would forward to other equipments. all the IP packet will be forwarding.
Default setting will be “Forwarding”.
IP Default TTL: Meaning how many times of “Forwarding” did an IP packet experience before loss. Default
value is 64.
8.1.8 IP Routing
Figure 8-10 IP Routing
The subpage shows the IP Routing status in active, the default route will be in the form of Ethernet, when the