User's Manual

E1 Spread Spectrum Radios
8-17
Base station acts as Terminal Station. The stations are in a PTP, point-to-point connection. Base station acts as
Center Station. When there are more than two equipments in the base station, please select this type of mode.
Then only we can use the IDU Net port function. Using Arbeit, it is possible to see all the equipment’s link in the
station by concatenating all the monitoring information of the station. Each base station can have NOT more than
ten
Center Station. Extended link can have a maximum of 255. This mode is also called the star topology, as
illustrated in the following figure:
Figure 8-19: Terminal/Center Station
Initialize
This function can randomly change the link of the stations, only provided it is in connection mode. Please refer to the
previous chapter on how to initialize.