TRIO TM INFO@KUATRACKS.COM P. 417.889.
0mm SKEWER TUBE 15mm SKEWER TUBE REAR STRAP INVENTORY FRONT VEHICLE RACK MOUNTING U-BOLT WRENCH KEY (2) U-BOLT (2) SKEWER TUBE WRENCH SECURITY NUT (4) BOTTLE OPENER BURLAP BAG REAR STRAP BOLT (2) REAR STRAP KNOB (2) CROSS BAR STRAP FRONT CROSS BAR INSTALL Hand thread all security barrel nuts prior to using 5 sided security wrench. Alternate tightening of each barrel nut until tight. WARNING: Excessive overtightening may dent vehicle cross bar.
BIKE FORK MOUNTING-9mm BIKE CABLE LOCK Step 1. Pull lock housing from end cap to release cable from magnetic stop. 2. SEAT FORK Step 3. 4. CLOSE LEVER Loop cable through rear tire and rear triangle of bike frame. Insert cable tip into lock housing to lock. You do not need the supplied key to lock but will need the key to unlock. 3. ADJUST KNOB TO ALLOW LEVER TO FIRMLY CLAMP FORK 1. OPEN LEVER Step 2. Slide cable out from lock housing.
KÜAT LIMITED LIFETIME WARRANTY Küat Racks Limited Lifetime Warranty WARNINGS ADVERTENCIAS AVERTISSEMENTS 1. Check tightness of all bolts and screws periodically. This rack is designed to carry 1 bike weighing no more than 45 pounds each. DO NOT USE OFF-ROAD. Follow instructions for proper assembly, mounting and loading procedures. Make sure your vehicle roof bars are in good working condition before each use. Do not use rain or wind covers or tarps with this product. 1. 1.