Piccolo USER’S MANUAL English
Manual issued on 09-01-2013
Piccolo CONTENTS rev.C SYMBOLS 5 1. Introduction 6 2. Unpacking 8 3. Package content 8 4. Safety and handling information 9 5. Physical 10 6. Power and voltage requirements 11 7. Amplifier overview 12 8. Setup and Operation 14 9. K-Framework 16 10. Service 17 11. Warranty 17 12. Declaration of conformity 18 13.
Piccolo 4 rev.
Piccolo SYMBOLS K-array declares that this device is in compliance with the applicable CE standards and regulations. Before putting the device into operation, please observe the respective country-specific regulations! WEEE Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling centre for such equipment. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
Piccolo 1. Introduction Philosophy The Piccolo audio system from K-array has been designed to satisfy music lovers who are looking for the highest quality sound from a virtually invisible speaker system. K-array has over twenty years of research and development experience in acoustics and digital audio signal processing design and production of professional sound systems for live theatre and concert performances.
Piccolo Components The Piccolo audio system is comprised of two mid-high speaker components, a sub woofer with a 6” driver and a passive radiator, and the amplifier and control module. There are no extraneous elements that are not essential to producing the highest level of fidelity and to enhance the listening experience.
Piccolo 2. Unpacking Each Piccolo audio system is built to the highest standard and thoroughly inspected before leaving the factory. Carefully inspect the shipping carton before opening it, and then examine and test your new loudspeaker system. If you find any damage immediately notify the shipping company. Only the consignee may institute a claim for damages incurred in shipping. 3. Package content 2x 1x 2x 2x 1x 2x 1x 8 1x rev.
Piccolo 4. Safety and handling information Read all safety information below and operating instructions before using Piccolo to avoid injury. For a downloadable version of the Piccolo User Manual and the latest version of this Important Product Information Guide, visit: www.k-array.com Warning. Failure to follow these safety instructions could result in fire, shock or other injury or damage to Piccolo or other property. It is important that loudspeaker systems are used in a safe manner. and turn off it.
Piccolo Piccolo should be placed so that its location does not interfere with its proper cooling. Repairing or Modifying Piccolo. Never attempt to disassemble, repair or modify the system yourself. Disassembling Piccolo may cause damage that is not covered under the warranty. The unit contains no user-serviceable parts. Repairs should only be performed by factory trained service personnel. Voltage requirement. Be sure that the supplied voltage stays between the specified range.
Piccolo 6. Power and voltage requirements Piccolo operates safely and without audio discontinuity if the AC voltage stays within both 85132 V and 170-264 V , at 50 or 60 Hz. Verify that your mains connection satisfies the power ratings of the device. CAUTION Connecting the system to an AC power mains with a voltage exceeding 270V will cause significant damage to the device and create a serious risk for users! VDE power cable rev.
Piccolo 7. Amplifier overview A B C D E F on G H / off I vol. 12 +/- rev.
Piccolo A) XLR balanced inputs. These two inputs accept balanced, low impedance audio signals which allow the use of long cable runs (>10mt), without losing the quality of the signal. B) RCA unbalanced inputs. These connections are the standard for home devices such as CD/DVD readers, portable devices, personal computers, etc. C) RCA unbalanced outputs. D) USB Remote Control plug for Remote Management via K-Framework software. E) F) Power plug. Left channel audio power output.
Piccolo 8. Setup and Operation WALL MOUNTING 1) Fix the wall brackets to the mounting surface with appropriate anchors or screws. 2) Connect the cables to the speakers. 3) Clip the speakers to the bracket using the magnets on the back of the speaker. TABLE OR SHELF MOUNTING 1) Place the stands on a plain surface. 2) Connect the cables to the speakers. 3) Clip the the speakers to the stands using their magnet, placed on the back .
Piccolo 5) Plug the cable from your CD/DVD player, mp3 reader, or any other compatible audio device into one input. 6) Plug the power cable and the speakers into their dedicated sockets. 7) Make sure the volume knob is in “0” position by turning it anti-clockwise until it stops. vol. - 8) Turn it on by pushing the volume knob and press start on your audio source. on vol. off + 9) Gradually turn the volume knob clockwise until it reaches the desired volume.
Piccolo 9. K-Framework K-framework is a management software for K-array speaker systems. Be sure you have the latest version of K-framework installed on your personal computer also in order to keep all systems firmware and preset banks up to date. To download your free K-Framework software, please navigate to the K-array “Software Download” page located at http://www.k-array.com/software Download the latest 32- or 64-bit installer. Decompress the .zip file and extract the “K-Framework.
Piccolo 10. Service To obtain service: 1) Contact the official K-array distributor in your country. They will direct you to the service centre. 2) If you are calling for service, have the serial number(s) of the unit(s) at hand for reference. Ask for Customer Service, and be prepared to describe the problem clearly and completely. 3) If the problem cannot be resolved over the phone, you must return the unit for service. 4) You will be given an RA (Return Authorization) number for job tracking.
Piccolo 12. Declaration of conformity Manufacturer/Importer: K-array srl unipersonale Brand: K-ARRAY Address: via Paolina Romagnoli - 50037 S. Piero a Sieve Firenze ITALY Date of Issue: 10 / 01 / 2012 Model Code: Piccolo Declaration: Complies with essential protection requirements of Council Directive 89/336/EEC on the approximation of the Lows of the Member States relating to electromagnetic compatibility.
Piccolo 13. Specifications Piccolo Acoustics Frequency range Maximum SPL 32 HZ - 18 KHz 92 dB Amplifiers Type Power to mid-high Power to subwoofer Protection 2 x class D – DSP controlled 50 W x 2 (100 W total) 110 W Dynamic limiter, over current, over temp, short circuits Transducers Mid-high (each) Subwoofer 4 x 0.5” Neodymium cone driver with 0.5” voice coil 1 x 6” Neodymium magnet with double 1.
UMC038AA01ENC K-array s.r.l. unipersonale Via Paolina Romagnoli - 50037 San Piero a Sieve (Firenze) - Italy tel. +39 055 8487222 - fax. +39 0558487238 e-mail: info@k-array.com www.k-array.
