KU36 Ultra slim, high power sub woofer USER MANUAL - english version
CONTENTS SYMBOLS SAFETY DECLARATION OF CONFORMITY 1. INTRODUCTION 2. APPLICATIONS 3. KEY FEATURES 4. UNPACKING 5. INCLUDED ACCESSORIES 6. PHYSICAL 7.
SYMBOLS K-array declares that this device is in compliance with the applicable CE standards and regulations. Before putting the device into operation, please observe the respective country specific regulations! WEEE Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling centre for such equipment. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
KU36 SAFETY DE WARNING • Install the speaker only in a location that can structurally support the weight of the unit. Doing otherwise may result in the unit falling down and causing personal injury and property damage. • Professional loudspeakers are capable of producing extremely high sound levels and should be used with care. Hearing loss is cumulative and can result from levels above 90dB if people are exposed for an extended period.
.B KU36 DECLARATION OF CONFORMITY This device complies with the essential protection requirements of Council Directive 89/336/EEC for the implementation of the Laws of the Member States relating to electromagnetic compatibility. This declaration applies to all specimens and manufacturing drawings which form part of this declaration. Assessment of compliance of the product with the requirements relating to electromagnetic compatibility was based on the following standards.
KU36 8 REV.
.B KU36 Ultra slim, high power sub woofer 1. INTRODUCTION The KU36 is a compact but extremely powerful, line array bass system comprised of 1 x 6” neodymium transducers combined with 2 x 6” passive transducer, engineered for maximum linear excursion and minimum residual noise. With a frequency range of 45Hz to 300Hz, the KU36 is a companion to any of the K-array Installation Series speakers, as well as the KZ10 or KV50.
KU36 3. KEY FEATURES • • • • • • • • • • Unique performance-to-size ratio 6” long-excursion woofer Double 6” passive radiator Extended frequency response Electronically protected Integrated flying points Double voice coil (4W+4W) Top quality components for outstanding performance Weather proof, suitable for outdoor installations Available in black or white 4. UNPACKING Each K-array fixture is built to the highest standard and thoroughly inspected before leaving the factory.
.B KU36 (4.2”) 106.7 mm 6. PHYSICAL weight: 6.8 Kg (15 lbs) 176 mm 108 mm (2.89”) 73.5 mm (4.25”) 37.1 mm (14.17”) (0.53”) 13.5 mm 360 mm 507 mm (19.96”) (1.46”) 37.1 mm (1.46”) REV.
KU36 7. WIRING KU36 4 W MODE 4 KA1-1 4 KU36 8 W MODE KA7-7 12 8W REV.
.B KU36 REV.
specifications KU36 Acoustics Power handling Impedance Operating frequency range 2 X 80 W (AES) 2 X 4W 45 Hz - 300 KHz. SPL 1W / 1mt 89 dB Maximum SPL 115 dB continuous - 121 dB peak Transducers Full range 1 X 6” Neodymium magnet with 1.5” voice coil + 2 X 6” passive transducer Audio Input Connectors Wiring 4-pin Phoenix Pin1=Ch 1+, Pin2=Ch 1-, Pin3=Ch 2+, Pin4=Ch 2- Recommended Amplifiers KA1-1, KA7-7, KA10-10 Physical Dimensions Weight 50.7 x 17.5 x 10.5 cm (19.96” x 6.89” x 4.13”) 6.
.B KU36 REV.
UMC010AA01ENB k-array is a brand of HP Sound Equipment s.r.l. Viale Roma 7/i - 50037 San Piero a Sieve (Firenze) - Italy tel. +39 055 8487222 - fax. +39 0558487238 e-mail: info@k-array.com www.k-array.
