Instructions / Assembly

adhesion. See Figure 7.
Align each support strap and adhere the suction cups to the window taking care
to keep similar tension on each strap. See Figure 8.
Make sure your EZ Mount Kitty Sill Deluxe with Bolster is level. Readjust as needed.
1
3
4
5
TIP
Figure 6
Figure 7
Figure 8Figure 9 Figure 10
REV1_03-17-20
Secure straps under hook and
loop material on both sides
Caution: As with any suction cup, debris, temperature
changes, sunshine and excessive use can weaken the
holding power. We recommend removing the suction
cups at least once per month to clean the window
area, clean the suction cups and then re-install them for
optimal strength.
EZ Mount Kitty Sill Deluxe with Bolster
Care & Instructions
Made in China
K&H Pet Products, Central Garden & Pet
Colorado Springs, CO
www.khpet.com | [phone]
Using glass cleaner, thoroughly clean and dry the window that will accommodate
the EZ Mount Kitty Sill Deluxe with Bolster. Clean each suction cup to ensure
proper adhesion to the window.
Holding the frame with the suction cups facing the window, gently push one
suction cup against the window. Level the frame and then gently push the second
suction cup against the window. See Figure 6.
2
INSTALLING ONTO A WINDOW
Care Instructions:
Remove cover and bolster. Machine wash &
line dry. Wipe frame with a damp cloth.
To operate blinds, curtains and window coverings with the EZ
Mount Kitty Sill Deluxe with Bolster
sill against the window. You can leave the bolster on or remove it depending on how
much clearance you need for your window coverings. Next, pull back both top corners
of the hook and loop material on both the right and left sides. See Figure 9. Then
pull straps on both right and left sides and secure them underneath the hook and loop
material and press down to adhere. See Figure 10. This will support the kitty sill frame
in the upright position. Blinds and curtains
can now operate normally.