User's Manual

VBLASTER-2400 Users Manual… DRAFT 8
____________________________________________________________________________________________________________
2617 JUAN TABO NE SUITE A, ALBUQUERQUE, NM 87112 PHONE [phone] FAX [phone] [e-mail]
TURN-ON PROCEDURES
Receiver
1. Connect antenna to receiver antenna port
2. Connect video-output port to video-input on a monitor
3. Turn monitor on
4. Connect cigarette lighter adapter to cigarette lighter socket OR
connect power port to wall adapter
5. Receiver is operational
Once the procedures are complete and the camera is on. If the transmitter is functioning,
there will be a live picture on the screen. If a gray screen appears, insure that the video
connection to the transmitter and to the receiver is correct and that the receiver is on. If
snow/static appears on the screen, check for proper channel selection by alternating the
switch. If the snow/static screen is still present, this is an indication that the transmitter
or receiver may not be functioning properly. Please see troubleshooting chart on Page 11
of this manual. If the system still is not operating, please contact K&A Wireless for
technical support.