User's Manual

VBLASTER-2400 Users Manual… DRAFT 7
____________________________________________________________________________________________________________
2617 JUAN TABO NE SUITE A, ALBUQUERQUE, NM 87112 PHONE [phone] FAX [phone] [e-mail]
RECEIVER OPERATION
To turn the receiver on, first connect the video port to an NTSC compatible monitor.
Second, connect the antenna port to an antenna. Finally, connect the power cable
supplied to the receiver and connect to wall or an automobile cigarette lighter for on-site
use. When the power is applied to the receiver, the power light should be illuminated.
Switch the channel selector switch, shown in Figure 3, to alternate channels. With the
transmitter turned on, alternate the switch until the image appears on the screen. For
optimum performance, the high-gain antenna supplied with the system should be
pointed in the direction of the transmitter and raised as high off the ground as
possible.
To turn the receiver off, remove the power connection.