User's Manual
VBLASTER-2400 Users Manual… DRAFT 3
.
2617 JUAN TABO NE, SUITE A, ALBUQUERQUE, NM 87112 PHONE 338-2380 FAX 338-2382 sales@ka-wireless.com
SAFETY NOTICES
1. THIS DEVICE IS FOR LICENSED USE ONLY
2. THIS IS NOT AN INTRINSICALLY SAFE DEVICE. DO NOT TAKE
INTO AREA WHERE INTRINSIC SAFETY IS REQUIRED. BODILY
HARM MAY RESULT IF WARNING IS IGNORED.
3. DO NOT OPERATE TRANSMITTER WITHOUT ANTENNA
CONNECTED TO ANTENNA PORT. FAILURE TO DO SO WILL
RESULT IN DAMAGE TO THE UNIT AND VOID THE WARRANTY.
4. THE TRANSMITTER IS FCC APPROVED UNDER FCC ID: OPH-
VBLAST2400. ANY CHANGES OR MISUSE OF THE PRODUCT MAY
VOID THE USER’S AUTHORITY TO OPERATE THIS PRODUCT.
5. THIS PRODUCT MUST BE PROFESSIONALLY INSTALLED. THE
RADIO AND ITS ANTENNA IS REQUIRED TO BE MOUNTED AT
LEAST 20 CM AWAY FROM THE HEAD/BODY OF THE USER AND
2CM AWAY FROM THE HANDS OF THE USER.
6. ONLY QUALIFIED TECHNICAL PERSONELL SHOULD PERFORM THE
INSTALLATION OF THE TRANSMITTER MODULE . ANY CHANGES TO
THE DESIGN AND/OR LOCATION OF THE MODULE AND ANTENNA
WILL VOID THE FCC LICENSE.
7. ANTENNA INSTALLATION INSTRUCTIONS AND LOCATIONS ARE FOR
THE PURPOSE OF SATISFYING FCC RF EXPOSURE COMPLIANCE
REQUIREMENTS, AND ARE NOT OPTIONAL.