User's Manual
6
limits. This device is not authorized for general
population, consumer or any other use.
This module is approved for operation as a single modular
approval under FCC Part 90. For compliance with FCC RF
Exposure requirements the following requirements shall be
met:
The module can be used with an antenna with a
maximum gain of 15dBi.
The radio and its antenna are required to be mounted
and kept at least 20 cm away from any part of the
user’s torso or head and must not be co-located or
operating in conjunction with any other antenna or
transmitter.
A label indicating that the module is for
occupational/controlled conditions will be placed as
shown in the pictures below
To control the end user exposure and ensure
compliance of the device containing this module with
the occupational/controlled environment exposure
limits, always adhere to the following procedures:
Place a label in a conspicuous location of the
device indicating that the device is for use in
occupational/controlled conditions only.
Transfer this RF Exposure information,
including the proximity allowed between the