VTRAN-2500 OWNER’S MANUAL K&A Wireless, LLC 6212B Antigua, NE Albuquerque, NM 87111 (505) 237-0847 Phone (505) 237-0873 Fax www.ka-wireless.com sales@ka-wireless.
SAFETY NOTICES: I. THIS DEVICE COMPLIES WITH FCC RULES PART 15. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITONS: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including that causing undesired operation. II. This is NOT an intrinsically safe device. Do not take into area where intrinsic safety is required. Bodily harm may result if ignored. III. DO NOT OPERATE TRANSMITTER WITHOUT ANTENNA CONNECTED TO ANTENNA PORT.
PRODUCT DESCRIPTION The VTRAN-2500 digital, video transmission system uses state-of-the-art DirectSequence Spread-Spectrum (DS-SS) technology. Operating in the 2.4 GHz ISM band, it provides long range transmission and superior performance as compared to the available analog (FM) video transmitters that comply with FCC Part 15 regulations. The ISM band is an unlicensed band allocated by the FCC, therefore no license is required to operate the system.
The receiver also includes a channel selector switch with an indicator. Each receiver can accommodate up to four different transmitters operating at four different channels. By scrolling through the channels, the images transmitted by the individual transmitters can be displayed. TURN-ON PROCEDURES 1. 2. 3. TRANSMITTER Connect dipole antenna to transmitter antenna port Connect video-output from camera to video-input port on the transmitter Connect power (or battery) to the transmitter 4. 5. 6. 7. 8.
TROUBLESHOOTING Receiver Operational? Yes Check Transmitter No Check Power Supply Connection No Display Light On? Yes Check Monitor Settings No Gray Screen with Channel Indicator? Yes Receiver Functional Transmitter Operational? No Turn Camera on and connect video No Video Connected and Camera on? Yes Is LED On? Yes/No Replace Battery or Check power supply Yes Live Picture on Monitor
