User's Manual

EV-TX-4500 Installation Manual… 11
Input Power
Input Voltage
5 to 24 volts DC (30 volt surge)
Input Current
225 mA @ 12 Volts DC (typical @
750mW)
Input Power 2.7 watts nominal (750mW RF output
power)
Reverse
Polarity
Protection
Resettable Fused DC Input current
limited to 1.5A @ 25 Degrees C
DC Input current limited to 30 ma
during accidental polarity reversal @
24 VDC in.
Low Battery
Shutdown
Adjustable 4 to 20 Volts DC
Microprocessor
ON/OFF
Open Drain/Collector (Low for
Shutdown)
Environmental
Operating
Temperature
-20 to +60 C (Case Temperature)
Humidity 95% Non-Condensing
Mechanical
Size 2.92 X 1.30 X 0.30 inches
Weight 1.5 Ounces
Other
FCC ID OPH-EV4600
EV-TX-4500 Installation Manual… 12
_______________________________________________________________
2617 JUAN TABO NE SUITE A, ALBUQUERQUE, NM 87112 PHONE
888.536.5207 FAX 505.338.2382 sales@ka-wireless.com
TROUBLESHOOTING
Test
transmitter
Rx
Operational?
N
o
Check power
indicator on?
Rx Operational?
Yes
Check monitor
and
ti
Static on the
screen?
Yes
Receiver
Functioning
N
o
Transmitter
operational?
Yes
N
o
Camera on and
connected?
Yes
N
o
Power supply
connected
Turn Camera on
_______________________________________________________________
2617 JUAN TABO NE SUITE A, ALBUQUERQUE, NM 87112 PHONE
888.536.5207 FAX 505.338.2382 sales@ka-wireless.com