Users Manual

。
2
5/N Icon
垂
2FF
专
Functions
On: CPE connected with power supply, the light is on under
power-on status.
Off: CPE disconnected with power supply, the indicator light
is off
On: After CPE starts up, the indicator light is on if SIM card ,s
inserted . It will blink after registering on the network and
dialing successfully
Off: CPE disconnected with power supply or the SIM card is
removed, the indicato 「 light is off
On: After CPE starts up, display the number of signal bars
according to the actual network cond 巾 ons
Off: CPE disconnected with power supply, the indicator light 1s
off
On: CPE starts up, after detected the SIM ca 「 d, the indicator
light is on.
Off: CPE disconnected with power supply or no SIM card is
inse 「 ted, the indicato 「 light is off
On: WIFI indicator light is normally on after the CPE powe 「 S
on, It blinks when terminal connected with WIFI
Off: CPE disconnected with power supply, the indicator light
will be off
On: After CPE starts up, the indicator light is on when there 1s
unread SMS. It blinks when receiving new SMS, if SMS is
区
not read, it will turn to constant light. When SMS storage is
full, it will blink continuously
Off: CPE disconnected with power supply or no unread SMS,
the indicator light is off
On: ETH1 port accesses with network cable, the indicato 「 light
blinks when working
Off: Plug out network cable from ETH1 port, the indicator light
if off
On· Working under 4G network, the 1nd1cator light 1s on
毋
Off. CPE powe 顷 sconnected or CPE is not wo 「 king under 4G
network
Power Power supply requirements . 12V, 1A
supply Please us
Long press reset key for 5 seconds then release, CPE will do
facto 「 y reset and the device will 「 estart automatically
11 Power key Press the power key to power on or power off the CPE
炽
3
4
6
口
上
8
9
1 O Reset key
2