R Visit our Web Site: http://www.jwin.
PRECAUTIONS CAUTION: WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
INSTALLATION INSTALLATION (Wall Mounting) Position the bracket (supplied) on the wall (as show below) where you want to hang the center unit. Drill 2 holes slightly undersized for a firm fit. Secure the bracket on the wall using 2 dowels and 2 screws (supplied) The mounting screws are to be anchored into solid wall support, such as wood frame or concrete wall. Mount the center unit onto the wall bracket. Make sure the mounting tab on the center unit fits securely into the mounting slot on the wall bracket.
LOCATION OF CONTROLS TOP VIEW 1. 2. 3. 4. 5. 6. 1 POWER Button EQ Button FUNCTION Button CD Door Open/Close Button FOLDER DOWN/MEM. DOWN Button FOLDER UP/MEM. UP Button FRONT VIEW 2 7 7. REMOTE Sensor 8. CD Door 9. STANDBY Indicator 10. PLAY MODE Button 11. STOP/BAND Button 12. CD/TUNER LCD Display 13. PLAY/PAUSE Button 14. VOLUME UP/DOWN Button 15. TUNING/CD SKIP UP/Next and DN/Back Button 16. PROGRAM Button 17. PEDESTAL 8 REMOTE CONTROL 3 9 4 5 6 28. FOLDER DN/MEM-DN Button 29.
OPERATING INSTRUCTION 1. Press the POWER button (1) or (31) to turn on the unit then press the FUNCTION button (3) or (32) to select RADIO mode. POWER ON/OFF 1. Connect the AC cord, make sure the voltage is correct and then press the POWER button (1) or (31) to turn on the unit. 2. Press the FUNCTION button (3) or (32) to select your desired mode (CD/AUX/TUNER). STORING PRESET STATIONS 1. Tune to the station you wish to store by pressing TUNING UP or DOWN button (15) or (33).
PLAYING COMPACT DISCS To play the disc 1. Press the POWER button (1) or (31) turn on the unit then press the FUNCTION button (3) or (32) to select CD mode. Press the PLAY/PAUSE button (13) or (35) to play the CD. Skip and Search Function Press the SKIP Next or Back buttons (15) or (33) briefly. FUNCTION IN PLAY MODE PRESS ONCE PRESS TWICE BACK TO THE BEGINNING OF PREVIOUS THE CURRENT TRACK TRACK Playing track 1 2. If there is no CD inside or disc damaged, a "- - -" display will appear.
PROGRAMMED PLAYBACK This CD player enables you to program up to 20 tracks in the sequence of your choice. First select CD stop mode. 1. Press the PROGRAM button (16) or (34) one time. (“MEM” flashes) 4. To continue to program, repeat steps 2 and 3 for each selection. PLAYING MP3 DISCS 2. Press CD SKIP / (33) to select desired track. 1. Press the POWER button (1) or (31) to turn on the unit then press the FUNCTION button (3) or (32) to select CD mode. buttons (15) or FUNCTION When program is full 2.
Note: Once your desired mode selected, press the PLAY/PAUSE button (13) or (35) to start playback from stop mode. To stop the disc playing Press STOP button (11) or (29). 4. Press the PROGRAM button again, then track 4 of folder 3 is stored. 6. Press the PLAY/PAUSE button (13) or (35) to play the programmed tracks. Stop condition (TOC display) Playing track 4 of folder 3 5. Press the PLAY MODE button (10) or (30) five times to cancel above modes.
TROUBLESHOOTING GUIDE CARE AND MAINTENANCE Should this unit exhibit a problem, check the following before seeking service. COMPACT DISC CARE Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers etc., to the disc label. Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive cleaners to clean the disc.
