System Instruction

Table Of Contents
Setup
72
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDatalink
(commercially available) is connected.
[Parking Assist Position]
Select where to display information about
obstacles on the screen (left or right).
“Left”/“Right (Default)
This can be set when the iDatalink
(commercially available) is connected.
[Driving Position]
Select the driving position (left or right).
“Left” (Default)/“Right”
System Setup
You can setup system parameters.
1
Press the [HOME]/[ ] button.
2
Touch [ ].
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [System].
System setting menu appears.
5
Set each parameter as follows.
[DEMO]
Select the demonstration mode. Default is
“ON”.
[Software Information]
Confirm the software version of this unit.
(P.73)
[Open Source Licenses]
Display the open source licenses.
[Initialize]
Touch [Initialize] and then touch [Yes ] to set
all the settings to the initial default settings.
Audio SETUP Memory is not initialized.
[OEM SETUP]
Confirm the information about or change the
settings for using the iDatalink (commercially
available).
[Language Select Mode]
Switch the mode to select a language.
[Easy] (Default): Selects a language easily.
[Advanced]: Allows you to select languages
for respective items.*
[Language Select]
Select a language.
[Time Format]
Select the time display format.
"12-Hour" (Default)/"24-Hour"
[Clock]
[NAV-SYNC ](Default): Synchronizes the clock
time with navigation data.
[Manual]: Set the clock manually.
[Time Zone]
If you have selected [Manual] for Clock,
select the time zone.
[Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P.73)
* If you select [Advanced] for Language
Select Mode, the following screen
appears.
[GUI Language Select]
Select the display language used for the
control screen and so forth.
[Navigation Language Select]
Select the language used for navigation.