Instruction Manual

Setup
65English
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDatalink
(commercially available) is connected.
■ [Parking Assist Position]
Select where to display information about
obstacles on the screen (left or right).
“Left”/“Right” (Default)
This can be set when the iDatalink
(commercially available) is connected.
■ [Driving Position]
Select the driving position (left or right).
“Left” (Default)/“Right”
System Setup
You can setup system parameters.
1
Press the [HOME]/[ ] button.
2
Touch [ ].
3
Touch [SETUP].
 SETUP Menu screen appears.
4
Touch [System].
 System setting menu appears.
5
Set each parameter as follows.
■ [DEMO]
Select the demonstration mode. Default is
“ON”.
■ [Software Information]
Confirm the software version of this unit.
(P.66)
■ [Open Source Licenses]
Display the open source licenses.
■ [Initialize]
Touch [Initialize] and then touch [Ye s ] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
■ [OEM SETUP]
Confirm the information about or change the
settings for using the iDatalink (commercially
available).
■ [Language Select]
Select a language.
■ [Time Format]
Select the time display format.
"12-Hour" (Default)/"24-Hour"
■ [Clock]
[GPS-SYNC] (Default): Synchronizes the clock
time with the GPS.
[Manual]: Set the clock manually.
■ [Time Zone]
Select the time zone.
■ [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P.65)
Ñ Adjust the date and time
manually
1
Touch [Clock] in the System setting menu.
2
Select [Manual].
3
Touch [Time Zone] in the System setting
menu.
4
Select the time zone.
5
Touch [Clock Adjust] in the System setting
menu.
6
Adjust the date, then adjust the time.
7
Touch [Set].