System Instruction

Controlling Audio
95English
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [MENU]/[ ] button.
h Popup menu appears.
2
Touch [Audio].
See the following section for each
setting.
• Set up speaker / X’over (P.96)
• Controlling equalizer (P.98)
• Set listening position / DTA (P.101)
• Controlling general audio (Fader /
Balance) (P.98)
• Set volume offset (P.99)
• Performing zone control (P.100)
• Set sound effect (P.100)
• Memory/recall the audio settings
(P.103)
3-way speaker system setup
(DNX996XR / DNX696S)
Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
1
Press the [HOME]/[ ] button.
h HOME screen appears.
2
Touch [ ].
h Source selection screen appears.
3
Touch [STANDBY].
4
Press the button 1 followed by the
button 2 for 1 second at the same time.
DNX996XR
2 1
DNX696S
2
1
h Speaker system select screen appears.
5
Select the crossover network mode.
h A confirmation screen appears.
6
Touch [Yes].
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Front focus of Listening Position / DTA
– Fader for Controlling General Audio
– Zone Control
– Selection of the speakers to output sound from
the cell-phone of Bluetooth HF/Audio
– Beep for User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.