System Instruction

Setup
90
User Interface Setup
You can setup user interface parameters.
1
Press the [MENU]/[ ] button.
h Popup menu appears.
2
Touch [SETUP].
h SETUP screen appears.
3
Touch [User Interface].
h User Interface screen appears.
4
Set each parameter as follows.
 [Small Audio Text]
Change the text size for the source control
screen.
[ON] : Change the text size smaller.
[OFF] (Default): Cancel.
 [Beep] (Except DNX996XR)
Turn the key touch tone on or off.
Default is “ON”.
 [Beep Volume] (DNX996XR)
Set the sound volume of the key touch tone.
"0" (Off ) – "3" (Default) – "5"
 [Widget SETUP]
Set up the widget displayed on the Home
screen. (P.26)
 [Parking Assist Display]
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDataLink
(commercially available) is connected.
 [Parking Assist Position]
Select where to display information about
obstacles on the screen (left or right).
“Left”/“Right” (Default)
This can be set when the iDataLink
(commercially available) is connected.
 [Language Select Mode]
Selects the mode to select a language.
[Easy] (Default): Selects a language easily.
[Advanced]: Allows you to select languages
for respective items.*
 [Language Select]
Select a language.
 [Touch Panel Adjust]
(Except DNX996XR)
Adjust the sensing position of the touch
panel. (P.91)
 [Time Format]
Select the time display format.
"12-Hour" (Default)/"24-Hour"
 [Clock]
[NAV-SYNC ](Default): Synchronizes the clock
time with navigation GPS data.
[Manual]: Set the clock manually.
 [Time Zone]
If you have selected [Manual] for Clock,
select the time zone.
 [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P.91)
* If you select [Advanced] for Language
Select Mode, the following screen
appears.
 [GUI Language Select]
Selects the display language used for the
control screen and so forth.
 [Navigation Language Select]
Selects the language used for navigation.