System Instruction

USB/SD
45English
DNX696S / DNX576S / DNR46EX /
DNR476S
1
Insert the microSD card into the slot until
it clicks.
2
Press the [ ] button.
3
Touch [ ].
4
Touch [SD]. (P.15)
Ñ Remove the SD card
DNX996XR
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press the [G] button.
DNR876S
1
Press and hold the [CAM] button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press and hold the [CAM] button.
DNX696S / DNX576S / DNR46EX /
DNR476S
Push the microSD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with your
fingers.
Ñ Usable SD card
DNX996XR / DNR876S
The unit is capable of playback of SD/SDHC/
SDXC memory cards complying with the SD,
SDHC or SDXC standard. A special adapter is
required to use a miniSD card, miniSDHC card,
microSD card, microSDHC, or microSDXC card.
The MultiMedia Card (MMC) cannot be used.
DNX696S / DNX576S / DNR46EX /
DNR476S
The unit is capable of playback of microSD/
microSDHC/microSDXC memory cards
complying with the microSD, microSDHC or
microSDXC standard.
USB/SD Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.104).
Control screen
7
4
3
5
2
1
6
Open the drawer
57