Instruction Manual

Setup
88
To register an original image
You can load an image from the connected
USB device and set it as the wallpaper image.
Before starting this procedure, it is necessary
to connect the device which has the image to
load.
1
Touch [User1 Select] or [User2 Select] on
the Wallpaper Customize screen.
2
Select the image to load.
3
Touch [Enter].
h The selected image is loaded and
the display returns to the Wallpaper
Customize screen.
NOTE
• Touching [
] rotates the image counter-
clockwise.
• Touching [
] rotates the image clockwise.
• Picture files: JPEG (.jpg, .jpeg), PNG (.png), BMP
(.bmp)
AV Setup
You can set AV parameters.
1
Press the [MENU] button.
h Popup menu appears.
2
Touch [SETUP].
h SETUP screen appears.
3
Touch [AV].
h AV screen appears.
4
Set each parameter as follows.
 [Android Auto Device Select]
(Except DDX819WBTL)
Select the device to be used in the Android
Auto mode. (P.33)
 [Apple CarPlay Device List]
Select the device to be used in the Apple
CarPlay mode. (P.30)
 [Speech Quality Adjust]
Adjust the speech quality.
[Microphone Level] : Adjust the level of
microphone gain. Default is “0”.
[Echo Cancel Level] : Adjust the level of
echo cancellation. Default is “0”.
[Noise Reduction Level] : Reduce the noise
generated in the surrounding environment
without changing the microphone volume.
Use this function when the voice of caller is
not clear. Default is “0”.
 [TV Tuner Control] (DDX819WBTL)
Sets when connecting the TV tuner to AV-IN
input terminal. (P.109)
To use this function, it is necessary to set
"AV-IN" to "None" in [Camera Assignment
Settings]. (P.79)
[ON]: Set to ON when connecting the 3rd
party TV tuner. AV-IN Name is set to TV. If
you connect the TV tuner made by DOS
and watch TV, you can perform some
simple operations by touching the screen
of this unit.
[OFF] (Default): Set to OFF when not
connecting the 3rd party TV tuner.