Instruction Manual

APPS
26
To switch the current screen to the Apple
CarPlay screen when connecting your
iPhone
• Touch [Apple CarPlay] icon on the source
selection screen. (P.13)
• Touch the following connection message if the
message appears.
NOTE
• The connection message appears when;
– The iPhone you used previously is connected
again.
– The screen other than HOME and the source
selection screen is displayed.
• The connection message is displayed for about
5 seconds.
Ñ Select an Apple CarPlay device
If two or more iPhones compatible with Apple
CarPlay have been registered, select the
iPhone to be used as the Apple CarPlay source.
1
Press the [FNC] button.
h Popup menu appears.
2
Touch [ ].
h HOME screen appears.
3
Touch [ ].
h SETUP screen appears.
4
Touch [AV].
h AV screen appears.
5
Touch [Apple CarPlay Device List].
6
Select a device.
The Apple CarPlay device connected via
the USB and the registered Apple CarPlay
devices ready for wireless connection are
displayed.
• [ ] : Displays a Bluetooth pairing waiting
dialog. For details, see Register the Bluetooth
device (P.61).
• [
] : Displays confirmation message to
disconnect the device.
• [
] : Displays Device Remove screen.
(P.26)
To delete the registered Apple CarPlay
device
1
Touch [ ].
2
Touch the device name to check.
 [; [ALL]
Selects all Apple CarPlay devices.
 [ [ALL]
Clears all check marks.
3
Touch [Delete].
h Confirmation message appears.
4
Touch [Yes].
h All the selected device(s) is deleted.
NOTE
• This operation also deletes the same device(s)
from the Bluetooth device list screen. (P.63)