MONITOR WITH DVD RECEIVER KW-V950BW MONITOR WITH RECEIVER KW-M855BW INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from .
Contents Before Use 4 APPS 25 Precautions ................................................................... 4 Apple CarPlay Operation .......................................25 How to read this manual ......................................... 5 Android Auto™ Operation .....................................27 Wireless Mirroring Operation...............................29 Basic Operations 6 Functions of the Buttons on the Front Panel ... 6 Spotify Operation ..........................................
SiriusXM® 44 Controlling Audio 79 SiriusXM® Basic Operation ....................................44 3-way speaker system setup ................................79 Storing Channels in Preset Memory ..................46 Speaker / X’over setup ............................................80 Preset select ...............................................................46 Controlling General Audio ....................................82 Direct search .........................................................
Before Use Before Use Precautions # WARNINGS Ñ To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metallic tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • If you experience problems during installation, consult your JVC dealer.
Before Use • This unit can only play the following types of CDs. • This unit may not correctly play discs which do not have the mark. • You cannot play a disc that has not been finalized. (For the finalization process, see your writing software and your recorder's instruction manual.) Ñ Acquiring GPS signal How to read this manual • The screens and panels shown in this manual are examples used to provide a clear explanation of operations.
Basic Operations Basic Operations Functions of the Buttons on the Front Panel KW-V950BW 1 2 KW-M855BW 1 3 4 3 4 NOTE • The panels shown in this manual are examples used to provide a clear explanation of operations. For this reason, they may be different from the actual panels. Number 6 Name Motion 1 –, + (Volume) • Adjusts the volume. The volume will go up to 15 when you keep pressing [+]. (P.10) 2 Disc insert slot • A slot to insert a disc media. 3 FNC • Displays the popup menu screen.
Basic Operations Turning on the Unit Initial Settings 1 Press the [FNC] button. Initial setup Perform this setup when you use this unit first time. 1 Set each item as follows. h The unit is turned on. NOTE • If it is your first time to turn the unit on after installation, it will be necessary to perform Initial setup (P.7). Ԃ To turn off the unit: 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. 4 Touch [Power Off].
Basic Operations Ԃ [Camera] Set the parameters for the camera. 1 Touch [Camera]. 2 Set each item and touch [ ]. For details, see Camera Setup (P.56). Ԃ [OEM SETUP] This function requires a commercial adaptor. Consult your JVC dealer for details. Ԃ [DEMO] Set the demonstration mode. Default is “ON”. 2 Touch [Finish]. Security Code Setup You can set up a security code to protect your receiver system against theft.
Basic Operations 6 Enter a security code with 4 to 8 digits and touch [Enter]. Calendar/clock settings 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 7 Enter the same code again and touch 3 Touch [ ]. [Enter]. Now, your security code is registered. NOTE • This setting is available when demonstration mode is set to “OFF”. (P.75) • Touch [BS] to delete the last entry.
Basic Operations Ԃ [Time Format] Select the time display format. [12-Hour] (Default)/[24-Hour] Ԃ [Clock] [GPS-SYNC ](Default): Synchronizes the clock time with the GPS. [Manual]: Set the clock manually. Ԃ [Time Zone] Select the time zone. Ԃ [Clock Adjust] If you select [Manual] for Clock, adjust the date and time manually. (P.75) NOTE • Please set the date and time. If they are not set, some functions may not work. Adjusting the volume You can adjust the volume (0 to 40).
Basic Operations Popup menu 1 1 Press the [FNC] button. • Function key1 to 3: The current screen changes to the one you have set. The function key1 and 2 are set to [Camera] and [Audio] function as default. For the function setting, refer to Customize popup menu functions (P.74). – [ ]: Displays the view camera screen. (P.56) h Popup menu appears. – [ ]: Displays the Audio screen. (P.79) • Touch and hold to display the Customize FNC Menu screen. (P.74) 2 Touch to display the popup menu.
Basic Operations HOME screen descriptions Most functions can be performed from the HOME screen. 1 2 1 Source selection screen description You can display icons of all playback sources and options on the source selection screen. To change pages, flick your finger leftward/ rightward on the screen. 1 1 3 4 1 1 • Short-cut playback source icons (P.13) 2 • Current source information. • Touch to display the control screen of the current source. 3 • Displays the source selection screen. (P.
Basic Operations Select the playback source 1 Press the [FNC] button. h Popup menu appears. ]. h HOME screen appears. • Displays the screen you have set in the Customize Favorite Key screen. (P.74) • Touch and hold to display the Customize Favorite Key screen. *4 • Turns off the AV source. (P.14) 2 Touch [ 3 Touch [ ]. From the screen, you can select the following sources and functions. • Switches to the Apple CarPlay screen from the connected iPhone. (P.
Basic Operations To select the playback source on the source control screen Customize Short-cut source icons on HOME screen You can arrange the positions of the source icons as you like. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. Display source selection buttons by touching [ ]/[ ] or flicking left or right on the source control screen, then select a playback source. To turn off the AV source 3 Touch [ ].
Basic Operations Source control screen descriptions 5 Artwork & information You can select whether to display an artwork and song information or only song information in more detail. Touching the artwork area switches to the VU meter. (The Disc, USB, iPod, Bluetooth audio sources only) There are some functions which can be performed from most screens.
Basic Operations List screen 5 [ There are some common function keys in the list screens of most sources. (P.22, 37, 40, 66) • Depending on the current source or mode, some function key may not appear. information area in the source control screen. h The list screen appears. For Bluetooth audio: 1 Touch [1]. h The list screen appears. You can use following operation keys from this screen. 2 6 4 5 1 Displays the list type selection window. 2 Displays a music/movie file list.
Widget Widget Widget Basic Operation Big widget Split widget Ԃ To change the widget format Slide two fingers upward/downward to switch between the big and the split widget mode. Photo Frame Widget You can display a slideshow of the image files stored in the USB memory on the HOME screen.
Widget Widget Setup Set up the widget on the HOME screen. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [User Interface]. To Photo Frame Setup 1 Touch [Photo Frame SETUP] on the Widget SETUP screen. 2 Set each item as follows. Ԃ [Sort Order] Specify a file sorting criterion.
Disc Disc (KW-V950BW) Playing a disc Ñ Insert a disc 1 Insert the disc into the slot. DVD/VCD Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • The screen shot below is for DVD. It may be different from the one for VCD. 1 When the operation buttons are not displayed on the screen, touch 7 area. Control screen 1 h The unit loads the disc and playback starts. Ñ Eject a disc 1 Press the [FNC] button. h Popup menu appears. 2 Touch [G].
Disc • [Hide]: Hides the control screen. •[ ] : Repeats the current content. Each time you touch the key, repeat modes are switched in the following sequence; ), Chapter repeat DVD: Title repeat ( ), Repeat off ( ) ( VCD (PBC On): Does not repeat VCD (PBC Off ): Track repeat ( ), Repeat off ( ) 2 Function panel Touch the left side of the screen to display the function panel. Touch again to close the panel. • I]: Stops playback.
Disc •[ ] : Randomly plays all tracks in current folder/disc. Each time you touch the key, random mode switches in the following sequence; Track random ( ) (Music CD only), Folder random ( ) (Disc media only), Random off ( ) Music CD/Disc media Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • In this manual, “Music CD” means a general CD which includes music tracks. “Disc media” means a CD/DVD disc which includes audio or video files.
Disc 7 Function panel (Disc media only) Touch the left side of the screen to display the function panel. Touch again to close the panel. •[ ] [ folder. File search Operation (Disc media only) You can search for a file according to hierarchy. ] : Searches for the previous/next NOTE • For operations in the list screen, see List screen (P.16). 8 Indicator Items • [IN]: Disc insertion status. White: A Disc is inside the unit. Orange: Disc player failure. 1 • [VIDEO]: Identifies the video file.
Disc Ԃ To switch among picture angles Touch [Angle]. Each time you touch this key, picture angles are switched. DVD Disc Menu Operation You can set up some functions using the DVDVIDEO disc menu. 1 Touch the framed area during playback. * These keys may not function depending on the disc. Ñ Highlight control Highlight control lets you control the DVD menu by touching the menu key directly on the screen. 1 Touch [Highlight] on the Menu Control screen. 2 Touch your desired item on the screen.
Disc Ԃ [Screen Ratio] Sets the screen display mode. [16:9 ](Default): Displays wide pictures. [4:3 LB]: Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). [4:3 PS]: Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). DVD Setup You can set up the DVD playback functions. 1 Touch the framed area during playback. Ñ Language setup This setting is for the languages used for the menu, subtitle, and voice.
APPS APPS Apple CarPlay Operation Apple CarPlay is a smarter, safer way to use your iPhone in the car. Apple CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of the product. You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving. You can also use Siri voice control to make it easier to operate iPhone. For details about Apple CarPlay, visit https:// apple.com/ios/carplay/.
APPS To switch the current screen to the Apple CarPlay screen when connecting your iPhone • Touch [Apple CarPlay] icon on the source selection screen. (P.13) • Touch the following connection message if the message appears. NOTE • The connection message appears when; – The iPhone you used previously is connected again. – The screen other than HOME and the source selection screen is displayed. • The connection message is displayed for about 5 seconds.
APPS Ñ Operation buttons and To deactivate available Apps on the home screen of Apple CarPlay 1 You can use the Apps of the connected iPhone. The items displayed and the language used on the screen differ among the connected devices. To enter the Apple CarPlay mode, touch [Apple CarPlay] icon on the source selection screen. (P.13) Press the [FNC] button. Ñ Switch to the Apple CarPlay screen while listening to another source 1 Press the [FNC] button. h Popup menu appears. 2 Touch [DISP].
APPS Ԃ About the placement of smartphone Install the smartphone connected as Android Auto device in the place where it can receive the GPS signals. When using Google Assistant, install the smartphone in the place where the smartphone easily catch a voice by the microphone. NOTE • Do not put the smartphone in a spot exposed to direct sunlight or near an air blowing out port of an air conditioner. The placement of the smartphone in such places can lead to malfunction or damage of your smartphone.
APPS Ñ Operation buttons and Ñ Switch to the Android Auto available Apps on the Android Auto screen You can perform the operations of the Apps of the connected Android device. The items displayed on the screen differ among the connected Android devices. To enter the Android Auto mode, touch the [Android Auto] icon on the source selection screen. (P.13) screen while listening to another source 1 Press the [FNC] button. h Popup menu appears. 2 Touch [DISP].
APPS 5 Operate your Android device to activate the Wireless Mirroring function, then connect to this unit. 6 Select “KW-V****”/“KW-M****” as the network to use. h When the connection is established, then the same screen displayed on the Android device is displayed. 8 Input the device name. 9 Touch [Enter]. NOTE • Apps is discontinued when the power is turned ON/OFF or you leave the vehicle. To restart Apps, operate the Android device.
APPS Spotify Operation 3 Operation keys •[ ] : New radio station that relates to the artist of the currently being played song is selected and playback starts. •[ ],[ ] : Skips the current song. •[ ],[ ] : Plays or pauses the content of the current station. Preparation • Install the latest version of the Spotify application "Spotify" on your iPhone or Android. iPhone: Search for "Spotify" in the Apple App Store to find and install the most current version.
APPS Ԃ[ Up] Returns to the previous list. About Spotify® Note • Ensure you are logged in to your smartphone application. If you do not have an Spotify account, you can create one for free from your smartphone or at www.spotify.com. • Because Spotify is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. • Some functions of Spotify cannot be operated from this unit.
APPS • [D] , [H] : Plays or pauses the content of the current station. • [F] : Skips the current song. (Note that this function is disabled when the Pandora skip limitation is exceeded.) Ñ Creates a new station 1 2 Touch [ ]. Touch your desired item. • [ ] (Bookmark Song) : Bookmarks a song in the current contents. • [ ] : Creates a new station. See Creates a new station (P.33). •[ ] : Touch to attenuate/restore the sound.
APPS About Pandora® NOTE • In the application on your device, log in and create an account with Pandora. (If you are not already a registered user, an account can also be created at www.pandora. com.) • Establish an Internet connection. • Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information. • Because Pandora® is a third-party service, the specifications are subject to change without prior notice.
USB USB Connecting a USB device 1 Connect the USB device with the USB cable. (P.29) 2 Press the [FNC] button. h Popup menu appears. 3 4 5 Most functions can be controlled from the source control screen and playback screen. Control screen ]. Touch [USB]. (P.13) 1 2 6 5 7 Ñ Disconnect the USB device 1 • Install the USB device in the place where it will not affect safe driving. • You cannot connect a USB device via a USB hub and Multi Card Reader.
USB 1 [CODEC]/ [ ]/[ ] • When a high-resolution source is played, its format information is displayed. •[ ] : Repeats the current track/folder. Each time you touch the key, repeat modes are switched in the following sequence: File repeat ( ), Folder repeat ( ), Repeat all ( ) •[ ] : Randomly plays all tracks in the current folder.
USB Search Operation You can search music or video files by the following operations. 1 2 Touch [1]. 3 Select a list type. Touch [S]. Ñ Link search You can search for a file of the same artist/ album/genre as that in the current track. 1 2 Ñ Category search You can search for a file by selecting a category. 1 2 3 Touch [Category List]. Touch the desired tag type. You can select from artists, albums and genres. h The list corresponding to your selection appears.
iPod/iPhone iPod/iPhone Preparation Ñ Connectable iPod/iPhone The following models can be connected to this unit. Made for • iPhone X • iPhone 8 Plus • iPhone 8 • iPhone 7 Plus • iPhone 7 • iPhone SE • iPhone 6s Plus • iPhone 6s • iPhone 6 Plus • iPhone 6 • iPhone 5s • iPhone 5c • iPhone 5 • iPod touch (6th generation) NOTE • Latest compatible list of iPod/iPhone. For details, see www.jvc.net/cs/car/ipod/.
iPod/iPhone iPod/iPhone Basic Operation 4 Operation keys Control screen 1 2 5 3 4 5 Content list Open the drawer 6 2 5 Close the drawer 2 • 1] : Searches for a track/file. For details on search operation, see Search Operation (P.40). • E] [F] : Searches for the previous/next track/file. Touch and hold to fast forward or fast backward. • [DH] : Plays or pauses. •[ ] : Touch to attenuate/restore the sound. 5 • Touch the right side of the screen to display the Content list.
iPod/iPhone Search Operation Ñ Link search You can search music files by the following operations. You can search for a file of the same artist/ album/genre/composer as that in the current track. 1 2 Touch [1]. 1 2 3 Select a list type. Touch [S]. Touch [Link Search]. Touch the desired tag type. You can select from artists, albums, genres and composers. NOTE • For operations on the list screen, see List screen (P.16). Ñ Category search You can search for a file by selecting a category.
Tuner Tuner 2 Seek mode Tuner Basic Operation Touch to switch seek mode in the following sequence: [AUTO1], [AUTO2], [MANUAL]. • [AUTO1]: Tunes in a station with good reception automatically. • [AUTO2]: Tunes in the memorized stations one after another. • [MANUAL]: Switches to the next frequency manually. Most functions can be controlled from the source control screen. To listen to the Tuner source, touch [Tuner] icon on the source selection screen. (P.
Tuner Memory Operation Selecting Operation Ñ Auto memory (FM only) Ñ Preset select You can store stations with good reception in the memory automatically. You can list and select memorized stations. This function can be used from the remote control. (P.90) 1 2 Touch [FM]. 1 Touch [ ] on the right side of the screen. Select a station from the list. Touch [ ] on the left side of the screen. Touch [SSM]. Ñ Search by program type (FM only) 3 Touch [Yes].
Tuner Traffic Information (FM only) You can listen to and watch traffic information automatically when a traffic bulletin starts. However, this feature requires a Radio Broadcast Data System that includes TI information. 1 Tuner Setup You can set tuner related parameters. 1 Touch [ ] on the left side of the screen. Touch [SETUP]. Touch [ ] on the left side of the screen. Touch [TI]. h TUNER SETUP screen appears. 2 h Traffic information mode is set.
SiriusXM® SiriusXM® Control screen SiriusXM® Basic Operation Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. To listen to the SiriusXM source, touch the [SiriusXM] icon on the source selection screen. (P.
SiriusXM® • Change the text size of the information smaller when the “Small Audio Text” is set to “ON” in the User Interface screen. (P.73) NOTE While getting contents, “Waiting” is showing on the display. 2 Band button Switches among bands. (SXM1/SXM2/SXM3/ SXM4) 3 Artwork • Displays/hides artwork area. • Displays the album artwork for most SiriusXM music channels 4 Operation keys • [1] : Display the Category search screen. For details on search operation, see Category/ Channel search (P.47).
SiriusXM® Storing Channels in Preset Memory You can store the current channel in memory. 1 Tune in the channel you wish to store in the memory. 2 Touch [ 3 Direct search You can tune in a channel directly. 1 Touch [ ] on the left side of the screen. Touch [Direct Channel]. 2 Enter the channel number and touch [Enter]. ] on the right side of the screen. Touch [SXM(1-4) P(1-6)] in which you want to store the channel for 2 seconds until a beep sounds.
SiriusXM® Category/Channel search Replay You can specify the desired category and select a channel. You can replay the last 60 minutes of the program from the current channel. 1 Touch [1]. 1 2 Select a category. Touch [L] or [Replay] on the function panel. Ԃ [E] [F] Press to skip to the previous/next track. Press and hold to rewind or fast forward. 3 h Channel list appears. Ԃ [DH] Plays or pauses. Select the desired content from the list.
SiriusXM® To return to live music/content 1 2 Touch the left side of the screen. Touch [Live]. TuneMix™ TuneMix™ plays a unique blend of songs from your Preset music channels of the current SiriusXM Preset Band, allowing you to build a custom channel from as few as two to as many as 6 music channels. You can even skip songs you don’t want to hear.
SiriusXM® Traffic & Weather Now™ Traffic & Weather Now™ allows you to access the latest report whenever you want to hear it. Select your city in the set up menu Select a City for Traffic & Weather (P.55). 1 2 Touch [ ] on the left side of the screen. Touch [Traffic & Weather]. The report starts from the beginning. To stop and return to the previous channel, touch it again. Indicator display • (White) : Played already. • (Green) : New information arrived. • (Purple) : Playing.
SiriusXM® SportsFlash™ SportsFlash™ will notify you when a big play happens during a game with one of your favorite sports teams. Choose to tune in and hear the play unfold like it was live. Continue listening to the game or return to your previous channel. 1 1 Touch [ ] on the left side of the screen. Touch [SETUP]. When a big play happens during one of the games, an Alert screen appears. Ԃ [Jump] Touch to tune in that channel and play back the big play.
SiriusXM® Ñ Parental code Ñ Parental Control You can set a SiriusXM parental code for Parental Control. Parental Control is a feature that provides the user with the ability to prevent unauthorized access to mature content and user selected channels. 1 Touch [Parental Code] on the SiriusXM SETUP screen. h Parental Pass Check screen appears. NOTE • The code number is set to “0000” as default. 2 1 Touch [Parental Control] on the SiriusXM SETUP screen. 2 Touch [User], [Mature] or [OFF].
SiriusXM® NOTE 3 • Touch [All-Channels] to display all channels. • To delete the parental lock channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. 4 Touch each channel in the list and set to ON or OFF. Touch each channel on the list and set to ON or OFF. [ON]: Locks the channel. [OFF]: Unlocks the channel. NOTE • To delete the skip channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. • Touch [Info Change].
SiriusXM® 3 Touch each content list item you want to check or uncheck. NOTE • You can select (;) up to 60 artists or songs. To select a Team Get alerted when your favorite sports team is playing on another SiriusXM channel with GameAlert™ 1 Touch [My Games]. 2 Touch the desired league in the list. 3 Touch the team(s) in the list you want to select. Ԃ To delete the Artist and Song 1 Touch [Delete]. 2 Touch the content(s) in the list you want to select. Ԃ [; All] Selects all contents.
SiriusXM® Ñ SportsFlash™ setup 5 Touch [ ] twice. Activating SportsFlash 1 Touch [SportsFlash] on the SiriusXM SETUP screen. h SportsFlash is turned on or off. Default is “ON”. Selecting SportsFlash Beep 1 Touch [SportsFlash Beep] on the SiriusXM SETUP screen. h SportsFlash Beep is turned on or off. Default is “ON”. Ԃ [Edit] Sets and removes teams. Ԃ [Priority] Sets the priority of a team. Selecting the teams for SportsFlash 1 Touch [SportsFlash Team Set] on the SiriusXM SETUP screen.
SiriusXM® 3 Touch [Done]. Ñ Selecting Featured Bands Update Messages You can set whether to be notified when the featured seasonal theme is updated. 1 NOTE • Priority can be set on up to 5 teams. • When priority has already been set for 5 teams, it cannot be set for any other team. Delete an unnecessary team. Ñ TuneStart™ 1 Ñ Select a City for Traffic & Weather You can select a city for which you wish to receive SiriusXM Traffic & Weather broadcasts and hear them from the beginning.
Other External Components Other External Components To switch the view camera View Camera NOTE • To connect a camera, see P.28. • To use a rear view camera, a REVERSE lead connection is required. (P.27) • If [Rear Camera Interruption] is active the camera screen is displayed when you shift the gear to the reverse (R) position. 1 Touch [ 1 ]. h Camera switching keys appear left/right side. 2 Select a view camera you want to switch.
Other External Components Ԃ [Rear Camera Interruption] [ON]: Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. [OFF ](Default): Select this when no camera is connected. 2 Select the view camera to set up. 1 2 3 Ԃ [Parking Guidelines] You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. Default is “ON”.
Other External Components 3 4 [Left] NOTE 5 [None] • Touch [Initialize] and then touch [Yes] to set all the Ñ To adjust the parking External audio/video players (AV-IN) guidelines NOTE • Install the rear view camera in the appropriate position according to the instruction manual supplied with the rear view camera. • When adjusting the parking guidelines, make sure to apply the parking brake to prevent the car from moving. 1 Touch [Parking Guidelines] in the Camera screen and set to ON. (P.
Other External Components OEM Features Operation • Displays the control screen of the Bluetooth streaming source provided for the vehicle. By connecting this unit to the bus system of the vehicle using an iDataLink (commercially available), this unit can access the satellite radio source provided for the vehicle and can display vehicle information on this unit. • Displays information about the Radar Detector. * • Displays information about the instruments such as a speedometer.
Bluetooth Control Bluetooth Control Using the Bluetooth function allows you to use various functions such as listening to the audio file and making/receiving a call. Information for using Bluetooth® devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as cell-phones, portable PCs, and other devices. Bluetooth devices can be connected without cables and communication with each other.
Bluetooth Control Register the Bluetooth device 5 Touch [Select Device] on the Bluetooth Setup screen. 6 Touch [ It is necessary to register the Bluetooth audio player or cell-phone in this unit before using the Bluetooth function. You can register up to 10 Bluetooth devices. NOTE • Up to 10 Bluetooth devices can be registered. If an attempt is made to register the 11th Bluetooth device, the Bluetooth device connected on the earliest date will be deleted to register the 11th one.
Bluetooth Control Ԃ Input the PIN Code in your smartphone/cell-phone. PIN Code is set to “0000” as the default. 9 3 Touch [ ]. Select the function you want to use. h SETUP screen appears. 4 Touch [Bluetooth]. Ԃ HFP [Hands Free1]/[Hands Free2]/[No Connection.] Select the hands-free number to connect. Ԃ A2DP/SPP [Audio/App] Select if you want to use the audio player app in your smartphone over A2DP, and the other apps in your smartphone over SPP. h Bluetooth SETUP screen appears.
Bluetooth Control 2 NOTE Touch the device name to check. • If the icon is lighted, it means that the unit will use that device. • You cannot select an Android device connected as an Android Auto device. 3 Set each profile as follows. Ԃ [; All] Selects all Bluetooth devices. Ԃ [ All] Clears all check marks. NOTE Ԃ [TEL (HFP) 1], [TEL (HFP) 2] Select when the device is connected with the unit as hands-free phone 1 or 2.
Bluetooth Control Ñ Change the PIN Code 1 2 3 Ñ Bluetooth basic operation Control screen Touch [PIN Code] on the Bluetooth SETUP screen. h Change PIN Code screen appears. Touch and hold [ ]. 4 5 1 6 Input the PIN Code. 2 3 1 Artwork/VU meter • Displays/hides artwork area. • When touched, switches the artwork to the VU meter. 2 Play mode indicator/Playing time 4 Touch [SET]. Playing the Bluetooth Audio Device Most functions can be controlled from the source control screen.
Bluetooth Control 6 Information display * 3 • Displays the name of track information. • Connected device name. • Change the text size of the information smaller when the “Small Audio Text” is set to “ON” in the User Interface screen. (P.73) Touch [ ] (white) on the left of the name of the device to be played. [ ] (white) changes to [ ] (Blue) and starts playback. * These items appear only when the audio player which supports AVRCP profile is connected.
Bluetooth Control Ñ File search 1 2 Touch [1]. Touch the desired file or folder. Using the Hands-Free Unit You can use the telephone function by connecting the Bluetooth telephone to this unit. NOTE • While Apple CarPlay or Android Auto is connected, the Bluetooth Hands-Free function and two Bluetooth devices connections cannot be used. Only the Apple CarPlay or Android Auto Hands-Free function can be used. Ñ Make a call 3 When you touch a folder its contents are displayed.
Bluetooth Control Ԃ Select the cell-phone to use When you connect two cell-phones 1) Touch [ ] to select the phone you want to use. Ԃ Bluetooth SETUP 1) Touch [ ]. Bluetooth SETUP screen appears. Call using the phonebook 1 2 3 Touch [ Touch [ ]. ]. Select the initial. Ԃ Voice Recognition 1) Touch [ ]. (P.68) NOTE • Status icons such as battery and antenna icons may differ from those displayed on the cellphone. • Setting the cell-phone in the private mode can disable the hands-free function.
Bluetooth Control Call using the preset number 1 2 Touch [ ]. Touch the name or phone number. Ñ Voice Recognition You can access the voice recognition function of the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The functionality depends on the cell-phone.) 1 Press the [FNC] button for 1 second. Press for 1 second h Voice Recognition screen appears. 2 Call by entering a phone number 68 1 2 Touch [ 3 Touch [ ]. Enter a phone number with number keys.
Bluetooth Control Ñ Receive a call 1 Touch [ [ Ԃ Adjust the receiver volume Press the [–] or [+] button. ] to answer a phone call or ] to reject an incoming call. Ԃ Mute your voice Touch [ ] to mute or not to mute your voice. Ԃ Output the dial tone Touch [DTMF] to display the tone input screen. You can send tones by touching desired keys on the screen. NOTE • While monitoring the picture from the view camera, this screen does not appear even if a call comes in.
Bluetooth Control Ñ Phone number preset Ԃ [Delete] To delete a preset number, touch [Delete] and then touch [OK] on the confirmation screen. You can register frequently used phone numbers in this unit. 1 2 Touch [ ]. Touch [Edit]. Ñ Phonebook transfer You can transfer phonebook data from your Bluetooth smartphone using PBAP. 1 2 3 Touch [ ]. Touch [ ]. Select where to preset. h Phonebook data transfer starts.
Bluetooth Control Ԃ [Bluetooth HF/Audio] Select the speakers to output the sound from the cell-phone (such as phone call voice and ringing tone) and Bluetooth audio player. [Front]: Outputs sound from the front speakers. [All ](Default): Outputs sound from all speakers. Hands-Free Setup You can make various settings for the HandsFree function. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. Ԃ [Auto Response]* Set the automatic response time to pick-up an incoming call.
Setup Setup Monitor Screen Setup You can adjust the image quality of video, menu screen, etc. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [Screen Adjust]. System Setup 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. h Screen Adjustment screen appears. 3 3 Touch [ ]. Adjust each setting as follows. Ԃ [Backlight]/[Contrast]/[Black]/ [Brightness]/[Color]/[Tint] Adjust each setting. Ԃ [Aspect] Select a screen mode.
Setup User Interface Setup You can setup user interface parameters. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [User Interface]. h User Interface screen appears. 5 Set each parameter as follows. Ԃ [Small Audio Text] Determine whether to change the text size for the source control screen smaller. “ON”/“OFF” (Default) Ԃ [Beep] Turn the key touch tone on or off. Default is “ON”.
Setup Ñ Customize Favorite key You can jump to your favorite function easily from [Favorite] icon. Ñ Customize popup menu functions You can register a function for each of the function key1 to 3. Function key1 key2 key3 NOTE • [Favorite] icon may be disabled on some screens depending on the registered function. When this icon is invalid, start the desired function by normal procedure. To register a function 1 Touch [Customize FNC Menu] on the User Interface screen.
Setup Ñ Adjust the date and time Special Setup manually You can setup special parameters. 1 2 3 Touch [Clock] on the User Interface screen. 1 Press the [FNC] button. h Popup menu appears. Touch [Time Zone] on the User Interface screen. 2 Touch [ ]. h HOME screen appears. 4 5 Select the time zone. 3 Touch [ ]. h SETUP screen appears. 4 Touch [Special]. 6 Adjust the date, then adjust the time. Select [Manual]. Touch [Clock Adjust] on the User Interface screen.
Setup 2 Ԃ [Viewing Angle] If it is hard to see the image on the screen evenly, adjust the viewing angle. The smaller the (negative) value, the more whitish the image on the screen looks. “0” (Default)/“-1”/“-2”/“-3” Confirm the software version. Ñ Change the wallpaper image NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. 1 Touch [Wallpaper Customize] on the Display screen. 2 Select an image from live or static wallpapers.
Setup To register an original color To register an original image You can register your original color. 1 Touch [User] on the Wallpaper Color screen. 2 3 Touch [Adjust]. You can load an image from the connected USB device and set it as the wallpaper image. Before starting this procedure, it is necessary to connect the device which has the image to load. Use [–] and [+] to adjust each color value. 1 Touch [User1 Select] on the Wallpaper Customize screen. 2 Select the image to load.
Setup AV Setup You can set AV parameters. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [AV]. h AV screen appears. 5 Set each parameter as follows. Ԃ [Android Auto Device Select] Select the device to be used in the Android Auto mode. (P.28) Ԃ [Apple CarPlay Device List] Select the device to be used in the Apple CarPlay mode. (P.26) Ԃ [Speech Quality Adjust] You can adjust the speech quality.
Controlling Audio Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 3-way speaker system setup 1 Press the [FNC] button. h Popup menu appears. Select the appropriate crossover network mode for the speaker system used (2-way or 3-way speaker system). 2 Touch [ ]. h HOME screen appears. 1 Press the [FNC] button. h Popup menu appears. 3 Touch [ ]. h SETUP screen appears. 2 Touch [ ]. h HOME screen appears. 4 Touch [Audio]. 3 Touch [ ].
Controlling Audio Speaker / X’over setup 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [Audio]. h Audio screen appears. 5 Touch [Speaker / Xʼover]. Ԃ [Location] (Only for Front, Rear) Select the speaker position you have installed. Ԃ [Tweeter] (Only for Front) You can set up the tweeter when you are selecting front speakers. None, Small, Medium, Large Ԃ [Xʼover] Display the speaker crossover setup screen.
Controlling Audio Ñ Crossover network setup You can set the crossover frequency of speakers. 1 Touch [Xʼover]. 2 Touch the speaker to set up. 3 Set each parameter as follows. *3 Only when “Subwoofer” is set to a mode other than “None” in [Speaker Setup]. When Speaker network is set to 3-way: Ԃ [FREQ] (High Pass) High Pass Filter adjustment. Ԃ [HPF FREQ], [LPF FREQ] (Band Pass) Band Pass Filter adjustment.
Controlling Audio Controlling General Audio 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [Audio]. h Audio screen appears. 5 Touch [Fader / Balance]. 6 Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [Audio].
Controlling Audio Ԃ [Bass EXT] (Bass Extend Settings) When turned on, the frequencies lower than 62.5 Hz is set to the same gain level (62.5 Hz). Ԃ [SW Level] Adjust the subwoofer volume. This setting is not available when Subwoofer is set to “None”. See Speaker / X’over setup (P.80). Volume Offset Finely adjust the volume of the current source to minimize the difference in volume between different sources. 1 Press the [FNC] button. h Popup menu appears. Ñ Recall the EQ curve 2 1 2 Touch [ ].
Controlling Audio Zone Control 8 Set each source as follows. You can select different sources for front and rear positions in the vehicle. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [Audio]. h Audio screen appears. 5 Touch [Zone Control]. Ԃ [Zone Select] Touch [Single Zone] to turn off the dual zone function. Ԃ [Front Source], [Rear Source] Select an audio source for each.
Controlling Audio Sound Effect You can set sound effects. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [Audio]. h Audio screen appears. 5 Touch [Sound Effect]. 6 Set each parameter as follows. Ԃ [K2] Turn ON/OFF the K2 function. Technology to extrapolate and supplement with proprietary algorithm, the highfrequency range that is cut off when encoding.
Controlling Audio Listening Position / DTA Position DTA control You can fine-adjust your listening position. Listening Position / DTA allows you to improve the sound field depending on the position of the seat you sit. Listening Position / DTA allows you to set “Listening Position” and “Front Focus”. You cannot set both at the same time. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [Audio].
Controlling Audio Ñ Front Focus Ñ Front Focus fine adjustment You can focus the imaginary sound image on the front of the selected seat. 1 2 3 1 Touch [Front Focus] in the Position / DTA screen. 2 Select a front focus position. For [Front All] and [All], select Priority L or R depending on which side you want to put the imaginary sound image. Touch [Adjust]. Touch [Delay]. Set each parameter as follows. Ԃ [Sound Image LR (Front)] Focus the sound image on the front of front seats.
Controlling Audio Audio Setup memory Audio Control settings can be memorized. The memorized settings can be recalled at any time. 1 Press the [FNC] button. h Popup menu appears. 2 Touch [ ]. h HOME screen appears. 3 Touch [ ]. h SETUP screen appears. 4 Touch [Audio]. h Audio screen appears. 5 Touch [Audio Memory]. Ԃ [SETUP Memory] Lock or unlock the Audio SETUP Memory/ Recall/Clear. Ԃ [Audio SETUP Memory] Memorize the current audio settings.
Remote control Remote control This unit can be operated using the remote control. The remote control is the optional accessory (RM-RK258). Battery Installation # WARNING • Do not ingest the battery, Chemical Burn Hazard The remote control supplied with this product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.
Remote control Key Name SRC Function Switches to the source to be played. In hands-free mode, hangs up the phone. VOL + – Adjusts the volume. ATT Lowers the volume when pressed once. Restores the previous volume when pressed twice. DISP Switches the screen between the current source and the App screen from the connected iPhone/Android. FM/R AM/S Selects the folder to be played. For the tuner source, selects FM/AM band to be received. For the SiriusXM source, selects the band to be received.
Connection/Installation Connection/Installation Before Installation Before installation of this unit, please note the following precautions. # WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow).
Connection/Installation • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth antenna. 9 x1 Ñ Installation procedure Bluetooth antenna unit Ñ Supplied accessories for installation 1 x1 2 (Black 1 m) x1 3 (Gray 1 m) x1 4 (3 m) x1 5 (M5 x 8 mm) x6 6 (M5 x 8 mm) x6 7 (3.
Connection/Installation Installing the unit 5 or 6 NOTE Car Bracket 5 or 6 NOTE • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). • Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation. • Please install this GPS antenna in an area away from any antennas that are used with CB radios or satellite televisions.
Connection/Installation Ñ Connecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Connect to the vehicle’s Accessory 1 parking brake detection switch harness. Light Green PRK SW (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Green/Black Purple To rear right speaker Purple/Black If no connections are made, do not let the cable come out from the tab.
Connection/Installation Ñ 3-way speaker system setup Ñ Connecting the system and external components 11 10 9 8 7 6 5 Subwoofer Preout Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. Preout RCA Cable (Sold separately) 1 1 AV Audio output (ø3.
Connection/Installation 7 Accessory 7: GPS Antenna Ñ Securing the USB extension cable 8 Accessory 4: Bluetooth Microphone 9 Rear view camera input (Yellow) 10 Front view camera input (Yellow) *2 For more information, see To set up the camera assignment settings (P.57). 11 VIDEO Output (Yellow) *1 Front view camera can also be connected to 6 via accessory 9. *2 Side (Left or Right) view camera can also be connected to 10 .
Connection/Installation Ñ Connecting an Android Ñ Connecting the camera smartphone Front view camera [1] Android smartphone[2] Left Side View Camera and Right Side View Camera [1] Micro USB to USB cable[2] [2] Accessory 9 Accessory 3 (Gray) (1 m) [3] Accessory 2 (Black) (1 m) [3] Front view camera input (Yellow) USB (Gray) terminal[1] Rear view camera [1] USB (Black) terminal[1] Rear view camera input (Yellow) AV-IN input [1] USB maximum power supply current : DC 5 V = 1.
Troubleshooting Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. NOTE • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Ñ About settings • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter.
Troubleshooting Read Error The disc is quite dirty. h Clean the disc. See Precautions on handling discs (P.4). Disc is upside down. h Load the disc with the labeled side up. Ñ SiriusXM Region Code Error The disc you wanted to play has a region code that cannot be played with this unit. h See Region Codes in the World (P.103) or try another disc. Subscription Updated - Press Return To Continue The SiriusXM subscription has been renewed. h Touching [Return] on the popup screen will clear the message.
Troubleshooting Ñ Apple CarPlay The speed sensor must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay. The speed pulse is not detected when the Apple CarPlay is started by connecting wirelessly or when the iPhone compatible with wireless Apple CarPlay is registered in [Apple CarPlay Device List]. h Check the connection of the speed pulse or plug in over USB to use Apple CarPlay.
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. Ñ List of playable discs (KW-V950BW) Disc types / Standard Support DVD Video DVD Audio DVD-VR DVD-R*1 v × × v DVD-RW DVD+R DVD+RW DVD-R DL (Dual layer) DVD+R DL (Double layer) DVD-RAM CD Music CD*1 CD-ROM CD-R CD-RW DTS-CD Video CD (VCD) Super video CD Photo CD CD-EXTRA HDCD CCCD Others Dualdisc Super audio CD v : Playback is possible. r : Playback is partly possible. × : Playback is impossible.
Appendix Ñ About files The following audio and video files are supported. Ԃ Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG-2/MPEG-4 AAC LC HE-AAC(V1,V2) MP3 (.mp3) MPEG-1/MPEG-2 Audio Layer 3 WMA (.wma) Windows Media Audio Standard L3 profile (Version 7,8,9) Linear PCM RIFF waveform Audio (WAVE) (.wav) Format FLAC (.flac) flac 8 – 320kbps, VBR 16 – 48 kHz 16 bit 8 – 320kbps, VBR 16 – 48 kHz 16 bit 8 – 320kbps 16 – 48 kHz 16 bit 16 bit/24 bit Vorbis (.
Appendix Region Codes in the World The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 Ԃ DVD disc marks ALL Indicates a region number. The discs with this mark can be played with any DVD player. 8 Ԃ Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing.
Appendix DVD Language Codes Code aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gl gn gu ha he hi hr hu hy 104 Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani G
Appendix Specifications Ԃ Monitor section Picture Size : 6.75 inches (diagonal) wide : 151.8 mm (W) × 79.68 mm (H) 5-31/32 × 3-1/8 inch Display System : TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.
Appendix Ԃ Bluetooth section Ԃ Video section Technology : Bluetooth Ver.5.0 Color System of External Video Input : NTSC Frequency : 2.402 – 2.480 GHz External Video Input Level (RCA jacks) : 1 Vp-p/75 Ω Output Power : Power Class2 External Video Input Level (mini jack) : 1 Vp-p/75 Ω Maximum Communication range : Line of sight approx. 10m (32.
Appendix 3-way X'Over High pass filter Frequency: 250/300/1k/1.6k/2.5k/4k/5k/6.3k/8k/ 10k/12.5k Hz Slope: -12/-18/-24 dB/Oct. Gain: -8/-7/-6/-5/-4/-3/-2/-1/0 dB Band pass filter Frequency: Through, 50/60/70/80/90/100/120/150/ 180/220/250/300 Hz 250/300/1k/1.6k/2.5k/4k/5k/6.3k/8k Hz, Through Slope: -12/-18/-24 dB/Oct. Gain: -8/-7/-6/-5/-4/-3/-2/-1/0 dB Low pass filter Frequency: 30/40/50/60/70/80/90/100/120/150 Hz, Through Slope: -12/-18/-24 dB/Oct.
Appendix About this Unit • This product includes FontAvenue® fonts licenced by NEC Corporation.FontAvenue is a registered trademark of NEC Corporation. Ԃ Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • Manufactured under license from Dolby Laboratories.
Appendix that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. – Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. – Neither the name of the Xiph.
Appendix Ԃ FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Appendix Ԃ Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Ԃ Informação sobre a eliminação de pilhas Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
