Manual

Additional information

_L Notes for connection

If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some

functions may not be performed automatically.

• The AV COMPU LINK terminal on some televisions indicates "11." Do not connect the terminal indicating "11"

with the AV COMPU LINK terminal on a receiver. If connected, the system will not work correctly.

Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating "DVD."

Otherwise, the system will not work correctly.

• There may be no description about connections to a DVD player in the instruction manual of a television or VCR.

However a television or VCR with AV COMPU LINK terminals indicating "ll" or "EX" can be connected to a DVD

player.

You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound

such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to

perform power switching.

1 Turnon the main power of the television.

_2 Inserta disc into the sourcecomponent.

3 Press PLAYof the source component.

The following actions are performed automatically:

• Turning on the power for the television.

• Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).

• Turning on the power for the receiver.

• Setting the source of the receiver to the component which has started playback.