Manual

Basic operations
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position
next time you press PLAY.
1 Setthe RESUMEsetting on the SYSTEMpageof the preferencedisplayto ON.
(See page 46 for details about how to set.)
2 Atthe position you want to interrupt playback,press STOP,or press DVD VII - TV (b/I onthe remote
control or _/I on the front panel.
The unit memorizes the interrupted position, while [RESUME] lights in the display window.
If you interrupt playback by pressing STOP in step 2 above and then turn off the power, the memory is not cleared.
• While the disc you interrupt playback last time is still in the disc tray
Press PLAY.
The unit starts playback from the position where you interrupted playback last time.
• To clear the resume position memory
Carry out one of the following:
* Take out the disc from the tray.
* Press a DISC (1 -3) button.
* Press STOP while stopped.
* Turn on the unit by pressing DVD (_/I "TV Q)/I (on the remote control) or Q)/I (on the front panel).
• if you want to resume playback, do not press a DISC(1 - 3) button to start playback or do not pressthe _/I (on the front panel)
or DVD (J_ll -TV (J_/I(on the remote control) to turn onthe unit.
• The resume function does not work with Audio CD discs.
• The resume function does not work if RESUME on the SYSTEM page of the preference display is set to OFF.
• in the caseof a Video CD/SVCD disc with PRCfunction, the unit may resume playback from a point slightly earlier than the
resume point you stored.
• The resume function does not work in the program or random mode.
20