Manual

Getting started
You can operate your TV from the remote control unit.
Setting the remote control signal for operating your TV.
Holding down TV/VIDEO - THEATER POSITION, enter the manufacturer code of your TV listed below by using the
numeric buttons (O - 9).
Do not release TV/VIDEO - THEATER POSITION. Keep holding it until the next step is completed.
Manufacturer code list
No Manufacturer
01 JVC
02 PANASONIC
O3 SONY
04 SHARP
05 TOSHIBA/BEIJING/CHANGHONG
06 MrrsuBISHI/CHANGHONG
07 HITACHI
08 SANYO
09 FUNAI
10 AIWA
11 DAEWOO
12 SAMSUNG
13 LG (GOLDSTAR}
14 THOMSON
No. Manufacturer
15 FERGUSON
16 PHILIPS/TCL/CHANGHONG
17 GRUNDIG
18 ITT
19 MIMER
20 FINLUX
21 NOKIA
22 NEC
23 JINXING/PEONY
24 PEONY
25 PEONY/CHANGHONG
26 KONKA
27 PEIJIN/NOBLEX
28 TCL
-- Numeric
buttons
_- TV/VIDEO -
THEATER
POSITION
Example:
To enter the manufacturer code "01": Press "0" then "1."
2 Press STOP while holding down TV/VIDEO - THEATER POSITION.
3 Try to operate your TV by pressing DVD (b/I - TV _)11while holding SHIFT.
If your TV turns on or off, you have successfully set the control signal.
The following buttons can be used for operating the TV:
Turns the TV on or off.
Changes the TV channels.
the TV volume.
Adjusts
Selects the TV channels.
_. Js rl
For some TVs, pressing 10 while holding down SHIFT
4- functions as the "-/--." "+10" functions as the ENTER button
QtoQ if your TV requires pressing the ENTER button after selecting a
@ channel number.
TVN_DEO
Switches input mode (either TV or VIDEO).
_LA_ER
_,osJr_o_
_ control unit is initially set for operating a JVC TV.
_, If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
]
You can control the volume of a JVC's amplifier or receiver by using the AMP VOL
button on the remote control unit.
16