Manual

Initial settings
You can change the Parental Lock settings later.
2-1, 5-1-
0 0 0 0
Q QCD
666
C_ C_ C_ _
_ _ j
,.IVC
1, 2-2, 3-2,
4-2, 5-2
-- 3-1,4-1
• While a DVD VIDEO disc is stopped or no disc is inserted
1 PressENTERwhile holding down • on the
remote control unit.
The Parental Lock on-
screen display appears
on the TV screen.
points [PASSWORD].
I_ P_.ENTALLOC_I
PASSWORD
I CURRENT pASSWORD? • •• PRESS 0-9 KEYI
2
3
Enter your current 4-digit password using the
numeric buttons (0 to 9) and press ENTER.
moves to [Country Code] if you enter the correct
password.
If you enter the wrong password, "WRONG!
RETRY.." appears on the TV screen, and you
cannot go to the next step.
To changethe country code, use CURSOR
</_ to select the desired country code and
press ENTER.
moves to [Set Level].
When you change the country code, you must
select the parental level.
4 To changethe set level, useCURSOR</_ to
selectthe desiredlevelwhile _ points [Set
Level],and then press ENTER.
moves to [PASSWORD].
5 Enterthe password using the numeric buttons
(0 to 9) and pressENTER.
[_ moves to [EXIT].
The password entered in the above step becomes
the new password. If you do not change the
password, enter the same password as in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
parental level. Otherwise, the new country code
and/or parental level will not become effective.
Pressing ENTER again returns to the opening display.
NOTES
• When you enter the wrong password more than 3 times
in step 2 above, [_3 moves to [EXIT] automatically and
CURSORA/v does not work.
• If you forget your password in step 2
Enter "8888."
54