Manual

Getting started
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier, MD, etc. by using an optional digital cable (OPTICAL or COAXIAL). The digital audio signal from a disc is
directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by
using an optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
The unit
l l O tcad0taca e
Red (not supplied)
Coaxial digital cable
(not supplied) Digital equipment
to Audio cable
(not supplied)
he OPTICAL jack is protected by the hinged cover.
connect the optical cable to the jack, press the
ver with the plug and connect it to the jack inside
I in the correct direction.
NOTES
• When you connectthe unit's DIGITALOUT to digital audio equipment, before using, make the "DIGITAL AUDIO OUTPUT"
setting in the "PREFERENCE2" on-screendisplay correctly accordingto the connectedaudio equipment. Ifthe "DIGITAL
AUDIO OUTPUT" isnot set correctly,loud noisemay be generated from speakers,causingdamage to them. See "DIGITAL
AUDIO OUTPUT" on page51.
• With the digital connection,the "COMPRESSION" settings in the "PREFERENCE2" on-screendisplay are invalid. Settings for
these items must be made from the decoder.
19