Manual

Getting started
You can enjoy high picture quality by connecting the unit's COMPONENT VIDEO OUT jacks (Y, PB, PR) to the COMPONENT
VIDEO IN jacks (Y, PB, PR) of your TV with the video cables.
Green_ _ _Red
The unit
L1
Component video cable
(supplied)
Red
_ White
[
Audio cable
(not supplied)
White
Red
TV
IN
_ -VIDEO
VIDEO
LEFT
AUDIO
RIGHT
Blue
Green_-- -'_Red
IN
The unit supports the Progressive scan system as well as the conventional Interlace scan system. If your television or
monitor supports the progressive video input, you can enjoy a high quality picture by making the Progressive scan mode
active.
How to make the Progressive scan mode active
Press and hold down the VFP - PROGRESSIVE SCAN button for a few seconds.
The scan mode switches between the Progressive scan and Interlace scan modes. When the Progressive scan mode is
selected, the PROGRESSIVE indicator on the front panel is lit in red. This indicator turns green during playback of a film-
source DVD VIDEO disc while the "PROGRESSIVE MODE" on the "PREFERENCE1" display is set to AUTO, FILM or
SMART (see page 51).
,.IVC
..am 5' '5' '5' '5' '5' '5 '5 o,_:s,
-- VFP - _ I_q
PROGRESSIVE _ .............. _7_ _ _'_
SCAN = ,=.__z i !l iI! ...................m
PROGRESSIVE indicator
• You should note that not all Progressive TV and High-Definition TV sets are fully compatible with the unit and may
cause artifacts to be displayed in the picture. In case of progressive scan picture problems, it is recommended that you
switch the setting to the "Interlace Scan" output. If there are questions regarding our TV set compatibility with the unit,
please contact our customer service center.
• All JVC Progressive TV and High-Definition TV sets have no problem. (Example: AV-61S902)
17