COMPACT COMPONENT SYSTEM COMPACT DISC AUTOMATIC CHANGER XL-MC2000BK OPEN/CLOSE XL-MC2000 COMPACT DISC AUTOMATIC CHANGER 200 STOP/CLEAR PLAY/PAUSE EXCHANGE RANDOM INTRO REPEAT PLAY MODE MEMORY CALL CANCEL POWER DISC/TRACK OPEN/ CONTINUE ONE DISC PROGRAM CLOSE REPEAT EXCHANGE RANDOM INTRO DISC TRACK 1 2 3 4 5 6 7 8 9 0 CALL CANCEL DOWN UP STANDBY 200 POWER OPTICAL DIGITAL OUTPUT MEMORY ENHANCED COMPULINK CONTROL SYSTEM ' DISC EJECT DISC TRACK –1 DISC +1 DISC RM
WARNING AND CAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
INTRODUCTION Thank you very much for purchasing the JVC product. We sincerely hope it proves its quality and performance to your full satisfaction. Please read the instructions contained in this manual in order to get the most of the product’s capability and performance. If there are any questions concerning the product, please consult your JVC dealer . Feature of XL-MC2000 • This component is designed to store up to 200 compact discs, change and play them automatically in three different playback modes.
English PRECAUTIONS Installation • Select the best location Select a level location to install this component, where it is free from extremes of temperature (5 to 35°C, or 41 to 95°F), humidity, dust, or vibration. If noise interference is caused during AM broadcast reception by a tuner/receiver located nearby, relocate it or this component, or turn off either one. • Moving the unit Before moving the unit, first remove all the discs. Turn the power off, making sure the standby indicator is lit.
SETTING UP Connecting the unit System control connections This compact disc changer/player needs to be connected to an amplifier/receiver for audio reproduction. If you are connecting the unit to a JVC audio component using the CompuLink-3 remote control system, connect the units with the accessory CompuLink cord. Either one of the COMPULINK-3 (SYNCHRO) jacks in the back of this unit can be used. CAUTION Do not connect the AC power cord until all other necessary connections have been made.
English Installing batteries in the remote control 1. Remove the rear cover of the remote control unit. 2. Install batteries. Be sure that the batteries are installed with correct polarity, (+) and (-). 3. Attach the rear cover. CAUTION • Install the batteries with their polarities correctly set. • Remove the batteries if the remote control is not going to be used for an extended period of time. • Do not expose the remote control to heat, flame, or direct sunlight.
CONTROL PANEL AND REMOTE CONTROL Control panel Alphabetic letters in brackets following button names indicate their counterparts on the remote control.
The information shown on the display of the control panel includes: current playback mode, function, disc (slot) and track numbers, program step number, track and total playing times, jog dial function, operation status, and track number table.
BASIC OPERATION 3. Place the disc in a slot, with its label facing to the left. Turning the power on OPEN/CLOSE Check that the standby indicator on the control panel is lit. Then press the POWER button either on the control panel or remote control.
English • Interrupting the playback Playing discs 1 Selecting a playback mode There are three main playback modes, namely CONTINUE, ONE DISC, and PROGRAM; each has selective playback functions. (See the following pages for the description of the playback modes and functions.) Select the mode using the PLAY MODE button on the control panel, or the CONTINUE, ONE DISC, or PROGRAM button on the remote controller.
CONTINUE MODE PLAYBACK Every loaded disc can be played entirely in the numerical order in the CONTINUE mode. After the playback of the last disc ends, the playback begins again from the first disc. Discs and tracks can be selected randomly from all the loaded discs and played (RANDOM function). One track can be played repeatedly in the basic mode as well as when the RANDOM function is selected (REPEAT-1 function).
One disc can be selected and played entirely in the ONE DISC mode. The starting track may be specified. Every track of the disc can be played once in a random order (RANDOM function). The entire disc can be played repeatedly (REPEAT function) or one selected track can be played repeatedly (REPEAT-1 function) in the basic mode as well as when the RANDOM function is selected. The beginning part of every track of the disc can be played for 15 seconds (INTRO function).
PROGRAM MODE PLAYBACK Discs and tracks can be selectively specified in a program and played according to the program in the PROGRAM mode. The steps in the program can be played in a random order (RANDOM function). The entire program can be played repeatedly (REPEAT function) or one program step can be selected and played repeatedly (REPEAT-1 function) in the basic mode as well as when the RANDOM function is selected. Reviewing the steps: Press the CALL button.
Playing the program repeatedly To repeat playback according to the program, press the REPEAT button, and select to show “REPEAT” on the display. Then start playing, which will be repeated until stopped. This function can be used in the basic PROGRAM mode as well as when the RANDOM function is effective. Press the REPEAT button twice to cancel the function, clearing the indication from the display during stop.
HANDING AND TAKING CARE OF DISCS SPECIFICATIONS & PACKING LIST Handling compact discs General Protect the disc from being scratched, warped, or damaged in any other way — the plastic disc can easily be damaged and the damaged disc disrupts sound reproduction and the player function. Other Readable discs: Power requirements: Power consumption: Keep every disc in its case AC 120V , 60Hz 11 W (POWER ON), 6.5 W (STANDBY mode) 7.8 kg (17.2 lbs) 435 x 199.5 x 482.
What appears to be a malfunction may not always be serious and can easily be corrected. The table below describes some typical problems and their remedies. Check them before calling your JVC dealer. Symptom The CD is not played. The sound is intermittent or harsh. The remote controller does not properly work. The component does not operate. Possible Cause English TROUBLESHOOTING Remedy The CD is not loaded. Load the disc. The CD is not placed in the slot with its label on the left side.
TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER? LIKE TO PURCHASE ACCESSORIES? IS HERE TO HELP! TOLL FREE: 1(800)252-5722 http://www.jvc.com Remember to retain your Bill of Sale for Warranty Service. Do not attempt to service the product yourself Caution To prevent electrical shock, do not open the cabinet.
LIMITED WARRANTY 1-1 USA ONLY ONLY FOR PRODUCT PURCHASED IN U.S.A. JVC Americas Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase for the period shown below. ("The Warranty Period") PARTS 1 LABOR YR 1 YR THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN THE COMMONWEALTH OF PUERTO RICO.
VICTOR COMPANY OF JAPAN, LIMITED EN.
