Manual

Getting Started
Connecting the AM Antenna
Rear Panel of the Center Unit (CA-VSDT2000)
AM loop antenna (Supplied)
Attach the AM loop to its base by snapping the tabs
on the loop into the slot in the base.
• The AM loop antenna can be attached to a wall.
Screw (not supplied)
LOOP
AM
Outdoor single vinyl-
covered wire
(not supplied)
Turn the loop until you have the best reception.
• If the AM loop antenna wire is covered with viny!, remove the vinyl by twisting it as shown in the diagram.
• Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord.
This could cause poor reception.
• If reception is poor, connect an outdoor single viny!-covered wire to the AM EXT terminal (Keep the AM loop
antenna connected.)
5