Manual

Warnings, Cautions and Others
Caution -- (5/I switch ! (CA-VSDT2000)
Disconnect the mains plug to shut the power off completely (the
(5/I goes off).
The (5/I switch in any position does not disconnect the mains
line.
• When the unit is on standby, the (5/I lights red.
• When the unit is turned on, the operation lamps light red.
The power can be remote controlled.
Cauation -- POWER switch! (SP-PW2000)
This apparatus is provided with a POWER switch to be able to
minimize power consumption for safe use. Therefore,
1 When doing initial setting, complete all the connections
required, connect the mains plug into the wall outlet, and
set the POWER switch to ON.
2 When not in use, set the POWER switch to OFE
3 Disconnect the mains plug to shut the power off completely.
The POWER switch in any position do not disconnect the
mains line.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1 Do not remove screws, covers or cabinet.
2 Do not expose this appliance to rain or moisture.
CAUTION
1. Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a news-
paper or cloth, etc., the heat may not be able to get out.)
2. Do not place any naked flame sources, such as lighted
candles, on the apparatus.
3. When discarding batteries, environmental problems must
be considered and local rules or laws governing the dis-
posal of these batteries must be followed strictly.
4 Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage,
locate the apparatus as follows:
1 Top: No obstructions and open spacing.
2 Sides/Front/Back: No obstructions should be placed in the
areas shown by the dimensions below.
3 Bottom: Place on the level surface. Maintain an adequate
air path for ventilation by placing on a stand with a height of
10 cm or more.
CAUTION
• About the Internal Cooling Fan
This unit (CA-VSDT2000) includes an internal cooling fan, so as
to allow for high-power operation within a small space.
This fan comes on when the sound level is set high, and may
also come on even at low sound levels if the internal temperature
rises. To ensure effective fan operation, please leave at least
1 cm clearance on each side of the unit.
IMPORTANT FOR LASER PRODUCTS
REPRODUCTION OF LABELS
1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE
I cLAss 1 ILASER PRODUCT
2 WARNING LABEL, PLACED INSIDE THE UNIT
ICAUTION: Invisibb laserlADVARSEL:Usynlig las_IVARNING: 0synlig laser-IVAR0: Avattaessa ja I
radiation when open and _ling ved _b_'ning, n_r straining n_irdenna del dr suojalukitus ohitettaessa
intedockfailedor_feated, sikkerhedsafbrydereerude _ppnad och sp_rlen _r olet altBina n_kym_tt6-
AVOIDD]RBCTEXPOSUREaf funktion. Urdg_udsa_ urkop_ad. Betrakfa ej EnaBle lasers_teilylle.
TO BEAM. e tese orstr& ng. d stl&en, s A_katsos_teeseen.
1 CLASS 1 LASER PRODUCT
2 CAUTION: Invisible laser radiation when open and inter-
lock failed or defeated. Avoid direct exposure to beam.
3 CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to qual-
ified service personnel.
Front view
CA-VSDT2000
1 cm 1 cm
Side view I20 cm
CA-VSDT2000
20 cm
SP-PW20OO
U' 'U
(Vertical position) (Horizontal position)
G-I