Manual

,/-+10
-- FM MODE
-- S ET
-->
m ),,IH
PRESET+
SOURCE _1_
Band display, Frequency display, Presetchannel
I
[ ]
FM 105.50MHz
FMmode indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can listen to FM and AM stations. Stations can be
tuned in manually, automatically, or from preset memory
storage.
• Before listening to the radio:
• Make sure that both the FM and AM antennas are cor-
rectly connected. (See page 4 and 5.)
One Touch Radio
Just press the FM/AM button on the Remote Control to turn
on the System and start playing the station you were last
tuned to.
• You can switch from any other sound source to the radio
by pressing the FM/AM button on the Remote Control (or
the SOURCE button on the Unit).
Tuning In a Station
1 Press the FM/AM button.
The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM.
FM/AM
AM _ _ ---_ FM
I I
(on tile Remote Controt)
• Using the SOURCE button on the Unit
Each time you press the button, the sound source
changes.
SOURCE
F FM -- AM _ MD/AUX1
(on tile Unit)
2 Select a station using one of the follow-
ing methods.
• Manual Tuning
Press the _ or I_1_1(/x or v) button repeatedly to
move from frequency to frequency until you find the
station you want.
OR
• Auto Tuning
If you press and hold the _ or I_1_1 (/x or v) but-
ton for one second or more, the frequency changes
down, or up, automatically until a station is tbund.
OR
• Preset Tuning using the Remote Control
(Possible only after presetting stations)
Select the desired preset number using the Number
buttons on the Remote Control. (For the preset num-
ber more than 10, press the +10 button then the Num-
ber button.) After 1 second the display will show the
preset number's band and frequency.
Example:
Press the +10 button then the 2 button continuously.
The preset number 12 "PI 2" appears.
/_ _') _) .'% .' .-. .'-'L,i ,i .-.'_" ." L:: :
-' j.- --_ - M i ".",,. i Mq?'
(After 1 second)
• Preset Tuning using the Unit
Press the PRESET+ button to select the desired preset
number.
Its band and frequency are displayed.
• In AM broadcast, reception sensitivity wi!! be changed by
turning the AM loop antenna. Turn the AM loop antenna
for best reception.
17