Manual

Getting Started

Now you can plug the AC power cord into the wall outlet, and your System is at your

command!

Before operating, verify that the display shows the clock. If malfunctions may occur, re-

connect the power cord.

Changing the Display and Control Buttons Settings

You can change the direction of the characters and symbols on the display and the assignment of the functions to each control

button on the Unit. Change the settings depending on whether the Unit is placed vertically or horizontally. The factory setting

is "V".

DISESET

When the Unit is placed vertically

Set the DISP.SET switch to "V".

HI_V 0:00

DISRSET

When the Unit is placed horizontally

Set the DISP.SET switch to "H".

H[_---]v

DISESET

I 0:00

__Y

CA U TION:

• Be sure to turn off the System when changing the settings.