DIGITAL VIDEO RECORDER VR-609 INSTRUCTIONS For Customer Use: Enter below the serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No: Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance.
JVC VR-609 -CONTENTS1. Impo r tant Safeguards --------------------------------------------------------------------- 6 2. Part Names and Features ----------------------------------------------------------------- 17 2.1 Basic Organization of DVR System ----------------------------------------------------------------- 17 2.2 Features ----------------------------------------------------------------------------------------- 18 2.
JVC VR-609 4.1.3 4.1.4 4.1.5 4.1.6 4.1.
JVC VR-609 5.7.3 H D D Management - - -- - - - - - - - - - - - - -- - - - - - ----------------------------------------- 68 5.7.4 Backup ----------------------------------------------------------------------------------------------------- 72 5.7.5 Auto Select ------------------------------------------------------------------------------------ 75 5.7.6 Video Output ----------------------------------------------------------------------------------- 76 5.7.
JVC VR-609 1. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 6.
JVC VR-609 SAFETY PRECAUTIONS (VR-609U) CAUTION ATTENTION RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE D’ELECTROCUTION NE PAS OUVRIR ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. ACUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTIUSATEUR. SE REFERER A UN AGENT QUALIFIE IN CAS DE PROBLEME. CAUTION: TO REDUCE THE ELECTRICK SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
JVC VR-609 SAFETY PRECAUTIONS(VR-609E) POWER SYSTEM Connection to the mains supply This unit operates on voltage of 220 V to 240 V AC, 50 Hz/60 Hz. Note: The rating plate and the safety caution are on the top of the unit. WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Warning Notice FOR YOUR SAFETY (Australia) 1.Insert this plug only into effectively earthed threepin power outlet. 2.
JVC VR-609 SICHERHEITSVORKEHRUNGEN(VR-609E) SPANNUNGSVERSORGUNG Anschluss am Netz Die Betriebsspannung für dieses Gerät beträgt AC220 V bis 240 V, 50 Hz/60 Hz. Hinweis: Das Typenschild und die Sicherheitshinweise befinden sich auf der Oberseite des Geräts. WARNUNG Bei dem Gerät handelt es sich um ein Klasse-AProdukt. In Haushaltsumgebungen kann ein solches Produkt Funkstörungen verursachen. In einem solchen Fall muss der Benutzer geeignete Maßnahmen ergreifen.
JVC VR-609 INSTRUCCIONES DE SEGURIDAD(VR-609E) SISTEMA ELÉCTRICO Conexión a la alimentación Esta unidad funciona bajo una tensión de entre 220 V y 240 V CA, 50 Hz/60 Hz. Recuerde: La placa de datos de servicio e instrucciones de seguridad se encuentran en la tapa de la unidad. ADVERTENCIA Esto es un producto de Clase A. En un ambiente doméstico, este producto puede ocasionar perturbaciones radioeléctricas, en cuyo caso, puede que el utilizador necesite tomar las medidas adecuadas.
JVC VR-609 SAFETY PRECAUTIONS(VR-609U/E) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION To prevent electric shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified service personnel. The OPERATE button does not completely shut off mains power from the unit, but switches operating current on and off.
JVC VR-609 SICHERHEITSVORKEHRUNGEN(VR-609U/E) ACHTUNG: UM DER GEFAHR VON BRÄNDEN UND ELEKTRISCHEN SCHLÄGEN VORZUBEUGEN, DARF DIESES GERÄT WEDER DEM REGEN NOCH HOHER FEUCHTIGKEIT AUSGESETZT WERDEN. ACHTUNG Um elektrische Schläge zu vermeiden, das Gehäuse nie öffnen. Im Innern befinden sich keine Teile, die vom Benutzer gewartet werden können. Überlassen Sie die Wartung qualifiziertem Service-Personal.
JVC VR-609 PRECAUTIONS DE SECURITE(VR-609U/E) AVERTISSEMENT: POUR EVITER LE RISQUES D’INCENDIE OU D’ELECTROCUTION, N’EXPOSER L’APPAREIL NI A L’HUMIDITE NI A LA PLUIE. ATTENTION Pour éviter les chocs électriques, ne pas ouvrir le coffret. Aucune pièce à l’intérieur n’est à régler par l’utilisateur. Confier les opérations d’entretien au personnel de service qualifié.
JVC VR-609 INSTRUCCIONES DE SEGURIDAD(VR-609U/E) ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGAS ELÉCTRICAS NO EXPONGA ESTE APARATO A LA LLUVIA O A LA HUMEDAD. ¡ATENCIÓN! Para evitar descargas eléctricas no abra el aparato. El interior no contiene ninguna pieza para su utilización por parte del usuario. Consulte el mantenimiento con técnicos de mantenimiento cualificados.
JVC VR-609 NORME DI SICUREZZA(VR-609U/E) AVVERTENZA: PER RIDURRE IL RISCHIO DI INCENDIO O DI FOLGORAZIONE NON ESPORRE L’APPARECCHIO ALLA PIOGGIA O ALL’UMIDITA’. ATTENZIONE! Per prevenire le scosse elettriche, non aprire il pannello di copertura (o la parte posteriore). All’interno non vi sono parti riparabili dall’utente. Affidare la manutenzione a personale qualificato.
JVC VR-609 PRECAUTIONS WARNING It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast, or cable programme and in any literary, dramatic, musical or artistic work embodied therein. • Hard-disk The hard-disk is a consumable item. Replacement is recommended after 10000 hours of use (if used in a 25°C environment).
JVC VR-609 2. Part Names and Features 2.1 Basic Organization of DVR System : In this Instructions, Digital Video Recorder is written as "DVR". Contents and shape can be different.
JVC VR-609 2.2 Features 1) High quality digital recording Output and playback High-Resolution digital recording by using Wavelet compression. 2) Simple operation Simple operation by jog /shuttle. 3) Simple setting Enables simple installation and operation with basic setting and camera inputs. 4) Remote data back up It is possible to back up and playback by using client program via network.
JVC VR-609 15) Automatic check and recovery function The system is designed for continuous, fault-free operation with built-in, self-monitoring functions that monitor each component of the system and will automatically restart into the previous mode if a system failure is encountered. 16) Camera control of popular dome models Able to control a multitude of external cameras through the RS-485 port.
JVC VR-609 2.3 Preparation of installation ■ Putting on a level place (1) Attach rubber feet. - Attach 4 rubber feet in the bottom surface of the equipment with 4 screws provided (M3 x 11mm). ■ Mounting to a Rack (1) Assemble 2 rack-mounting brackets - Fasten the rack-mounting handle to the rack-mounting angles using 2 screws provided (M4 x 10mm). Assemble 2 brackets in the same procedure. (2) Remove 8 screws - Remove the 8 screws at the right and left side surface of the equipment. (M4 x 12mm).
JVC VR-609 2.4 Part Names and Description • Front ① ⑧⑨⑩ ⑫ ⑬ ② ④ ⑪ ③ ⑦ ⑤ ⑥ ① Operate Switch : Operate ON/OFF switch. Operate on/off by pressing this button for about 5 seconds. During system starting, it is displayed "9 CH Digital Video Recorder" and "Preparing system. Please wait a moment." -> " Waiting to detect 1394 HDD...". Please wait for a while to starting.
JVC VR-609 ④ IMAGE SEQUENCE Button : This button is for replay PB screen to IMAGE SEQUENCE mode. ▲ (up) Button : Menu Navigation Button. Moves cursor up. ⑤ ZOOM Button : This is used to zoom a freeze-frame in live or playback mode. Selected screen is X2. ENTER Button : This is for selecting set-up Menu. ⑥ TRIPLEX Button : This button is for replay PB screen to TRIPLEX mode. ▼ (down) Button : Menu Navigation Button. Moves cursor down.
JVC VR-609 • Rear ① ② ③ ⑤ ④ ⑥ ⑨ ⑩ ⑧ ⑦ ⑪ ⑭ ⑫ ⑮ ⑬ ① LAN : Enables screen search and control via Network. (Please use a category 5 cable with a shield.) ② USB Port 1,2 : For backup with external FDD or memory stick. It does not work both USB1 & 2 at the same time. Please use one of them. ! Please turn off the power when you connect external USB with DVR. ③ Spare : This terminal is not used. ④ RS-485 : For connecting with external Pan/Tilt camera. (Please use a twisted-pair cable with a shield.
Digital Video Recorder 3. Explanation and Application 3.1 Basic Schematic of the DVR System : This system can record up to 9 composite video signals. Ability to check multiple screens during playback by using monitors & VGA units. It supports screen search, monitor, and remote control through the Network. 3.1.1 Basic Schematic NETWORK Video signal of the input channel is 1.0 Vp-p on a 75Ω load. THROUGH OUT is changed to Hi-Z Automatically.
JVC VR-609 3.
JVC VR-609 3.3 Pan/Tilt Camera Connection and Control It is possible to control the Pan/Tilt camera without special devices. The Pan/Tilt camera supports RS-485 and is given an ID for parallel connection. Easy to install from the menu screen and possible to control by using the Jog Shuttle. Recommended Cameras: Manufacturer Model JVC TK-C676 JVC TK-C655 3.3.
JVC VR-609 ● Connection of RS-485 Control signal cable VR-609 RS-485 Connector Camera1 Connector + RX+ C - RX- D GND Camera2 Connector When you install in a place with many noises, please use a twisted-pair cable with a shield. A shield cable should be connected to a GND terminal. RX+ C RX- D Camera9 Connector RX+ C RX- D 3.3.2 Setting values of TK-C676 or TK-C655 Item Value Switch 4 ON Switch 5 ON Switch 8 Terminal equipment is set to ON. Other equipments are set to OFF.
JVC VR-609 3.4 External Product Connections and Applications 3.4.1 External Product Connection of ALARM INPUT and Application There are 9 alarm jacks for external devices. Able to set-up REC ON/ OFF and Digital out motion according to ALARM IN signals. GND 1 2 3 4 5 6 7 8 9 Connection Diagram 5V 5V ALARM IN SW 1 3 DC GND Internal Circuit Common GND Circuit Diagram ! Each External device which is connected with ALARM IN should be connected with GND and Alarm In.
JVC VR-609 3.4.2 External Product Connection of ALARM OUT and Application Supports up to 4 separate alarms for motion control or alarms. Possible to install output-events to each out terminal from the menu. GND 1 2 3 4 + Connection Diagram Alarm Output DC POWER Common GND Inside DVR Circuit Circuit Diagram OUTPUT EVENTS Digital inputs to alarm 1~ 9, Disk Full, Video Loss, Power Off, Admin. PW Change d, Motion Detect.
JVC VR-609 3.5 Installation and Application for Network Interface 3.5.1 Connection and Installation for Remote Control Supports Web server, remote control, and remote file transfer due to 10/100mega Ethernet I/F. Organization of Remote Control 3.5.2 How to Setup Static IP 1) Connect Network line, which has a fixed IP, by using the hub. 2) set-up system network at the Setup Menu. Main Menu System Administration Network Setup 3) Link web browser which supports JAVA Applets. ( MS Internet Explorer 6.
JVC VR-609 3.5.3 Network Setup IP Address : ____.____.____.____ Subnet Mask : ____.____.____.____ Gateway : ____.____.____.____ DNS : ____.____.____.____ Web Server Port Number : ___ We highly recommend you consult the Network Manager. ! Note ● IP Address : This is the name of the product in TCP/IP. You can use any IP in one Network. If you want to link with the Internet, you need an Global IP address to avoid conflict. ● Subnet Mask : It is 32 Bit in length.
JVC VR-609 3.6 Application of Remote Control Software 3.6.1 Using the "remote control software" This is for viewing live or searching playback screens from a remote location. [ Quality of the live screen depends on the recording quality and Network condition.] How to Setup 1) Start Web browser. ( We highly recommend CPU : over 500MHz, RAM : over 64MB, OS : Windows 98/ Me/ 2000/ XP, Browser : over Internet Explorer 5.5/ 6.0 ) 2) Enter IP number in the homepage address.
JVC VR-609 3.6.3 Live Screen Search This is for searching 1, 4, 9 channels simultaneously from a remote location. It is possible to control the Pan/Tilt camera, which allows to set-up the position of the Pan/Tilt camera from a remote location. ► Pan/Tilt control : Possible to PAN, TILT and ZOOM by clicking the button on the web screen. 3.6.4 Playback Screen Search This is for searching playback screens. It is possible to check date and time.
JVC VR-609 ! Note ● ● ● ● ● ! Remote monitoring is limited to 6 persons for assurance of the reliability of the system. Only one person is allowed to see the web playback screen. Possible to restrict remote user by password. Possible to delay because of system status. The reliability of remote monitoring is subject to the reliability of the Internet connection. ( Try rebooting in case of Internet malfunctioning.
JVC VR-609 4. Function Explanation and Menu Setting This system can set-up the motion conditions of the camera, recording conditions, alarms, audio, and system settings from the monitor menu. 4.1 Front Button Explanation 4.1.1 Before Use Make sure all the devices are properly connected as described in Chapter 2, then connect to the power source. ! When you turn on/off the power, please use power switch on the front. HDD can be damaged as you use main power switch on the rear. 4.1.
JVC VR-609 ● Alarm Reset button is for stopping the external alarm motion. ● AUTO Button is ON/OFF. As pressing this buttons, the divided screen is switched automatically. 4.1.3 REC ● By pressing this button, recording starts. The REC LED is on while recording. As pressing this button again, recording is stopped. The REC LED blinks during the Alarm record. 4.1.4 PLAY ● Press this button to select playback condition. Play LED is on while playing. ( Refer to play mode for more details.
JVC VR-609 SHUTTLE ● JOG & SHUTTLE can search by frame in play mode by using JOG when it is paused ( ll ) and possible to quick search by an angle of the shuttle. ● At the menu setting, it is possible to move the position or change the value by using JOG . ● Slow playback can be performed by using JOG during playback/Reverse playback. It takes a time for a while, from a SLOW onscreen display "| | | | ► " appear and then a SLOW PLAYBACK image starts.
JVC VR-609 4.1.7 Explanation of Image Sequence and Triplex ● IMAGE SEQUENCE : One playback channel is replayed to the divided screen field by field in sequence. Press the display button to select the type of display division. Image Sequence Playback Screen of 9 Channel ● TRIPLEX : This is an overlay (picture in picture) screen. You can monitor live screen and playback screen at the same time.
JVC VR-609 5. Main Menu Camera Control, Camera Details, Pan / Tilt model. set-up Manual Recording, Schedule, Alarm Recording. set-up Alarm Name, Alarm Link. Select 8 screen group which is displayed when you press the “User” button. set-up Audio. set-up Main Menu. System Log, Alarm Log, HDD Management Backup Auto Select Video Output Administration About System. ! Possible to change setting value by using Jog and direction buttons.
JVC VR-609 5.1 Camera Setup It is possible to set-up image which will connect at input port and able to set-up Pan/Tilt camera which will connect with RS-485. 5.1.1 Camera Control Make sure all of the Pan/Tilt cameras are the same manufacturer. Use the cameras which are supported by the same protocol. 1) RS-485 enables long distance transfer. 2) Possible to connect in parallel. 5.1.1.
JVC VR-609 5.1.1.2 How to Use 1) Checks camera ID setup value from the camera setup menu. 2) Selects Pan/Tilt Control from the menu. 3) Selects motion by Jog or right/left button. 4) Moves shuttle left or right. Checks whether camera ID and Pan/Tilt camera ID are the same installation if the Pan/Tilt camera does not activate. Also, checks whether the control line of the Pan/Tilt camera is in the correct location. 5) Press the EXIT button to return to the Camera Setup Menu.
JVC VR-609 5.1.2 Camera Details Setup channel ● Installs Name, Camera ID (Pan/Tilt Camera), Model and Color (Brightness, Contrast, Saturation, Hue) of each channel. 5.1.2.1 How to Setup 1) Checks the channel number as indicated at the bottom of the tab, and then checks whether the background is the correct screen. (The channel number can be changed by pressing the INPUT button.) 2) Selects contents which you want to change by jog.
JVC VR-609 5.1.2.2 Camera Name ● Name : Possible to create an alphanumeric nickname of up to 16 characters (including symbols) as shown below. You can see the next character repeatedly by using Jog. Character Mark Blank ! “ # $ % & ’ ( ) ” + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ABCDEFGHIJKLMNOPQRSTUVWXYZ [＼]^_’abcdefghIjklmnopqrstuvwxyz{|}~ How to Use 1) Selects Name by Jog. 2) Possible to write and amend if you press the ENTER button. 3) Writes and amends by using the RIGHT/LEFT button and Jog.
JVC VR-609 5.1.2.4 Adjustment ● Possible to install each input video color ( Brightness, Contrast, Saturation ) value as a number 0~100 and Hue can be installed as a number -128~127. Please, install a proper value for a background checking screen. ● How to Setup 1) Move to the desired position by using Jog or up/down buttons. 2) If you press the ENTER button, the next image is displayed with video input. 3) Jog left or right (or press up/down buttons) for changing the number.
JVC VR-609 5.1.3 Pan/Tilt Model Select None JVC Camera Pelco Camera Selects one of Camera driver. * If you connect with TK-C676/TK-C655, please select "JVC CAMERA" ● How to Setup 1) Connect the Pan/Tilt camera to the RS-485 port. 2) Select the same drive, which is selected from the “Pan/Tilt Model Select” menu. 3) Set-up the Camera ID at “Camera Setting”. 4) Test it by using Camera Control.
JVC VR-609 ● Selects baud rate for each camera.
JVC VR-609 5.2 Recording Setup 5.2.1 Manual Recording Manual Recording is for setup recording condition of each channel as pressing REC button when it is not recorded according to schedule. ● Possible to control recording for each channel as pressing REC buttons. ● As pressing Enter button after moving cursor to channel by using Jog, channel for setup will be changed blue bar as blow. In case Schedule Recording Box is checked, Manual Recording is not working.
JVC VR-609 ● Each symbol means as below. ! · · · · In case Schedule Recording box is checked, recording is started according to schedule regardless of Manual Recording. For using Manual Recording, do not check Schedule Recording box. ● : Always Recording. A : Alarm Recording. M : Motion Recording. fps/fps : The former ‘fps’ is field rate of Always Recording, the latter ‘fps’ is filed rate of Alarm Recording/Motion Recording.
JVC VR-609 5.2.2 Schedule ● Schedules recording by date, time and channels. ● Schedules recording for specific day. ● If it changes from a menu, a clock mark is displayed on the screen lower right, and it will be in the state of TIMER STANDBY or TIMER RECORD. VR-609 does not have a power-saving mode. 5.2.2.1 Explanation of Recording Schedule 1) Time ● The above numbers indicate the hour in the day.
JVC VR-609 2) Channel ● The left numbers indicate the input channel. (1 ~ 9) 3) Quality Level, Alarm Recording ● QL indicates quality level as recording. ● AR indicates whether Audio Recording or not. 4) Recording Events ● : Always Recording. A : Alarm Recording. M : Motion Recording. ● F/F=fps/fps : The first ‘fps’ means field rate of Always Recording, The second ‘fps’ means field rate of Alarm Recording/ Motion Recording.
JVC VR-609 5.2.2.2 How to Setup ● Recording Schedule is set-up in block. Minimum block is an hour. A time setting cannot be performed from the remote control unit. Please use the front panel buttons. ! ● How to Setup Recording Schedule Block 1) As using left/right direction button, designates time block at the same channel. As using up/down direction button or jog, designates channel block at the time zone of 0 hour.
JVC VR-609 ● When the yellow bar is located in the right side of a specific block and you press the left arrow button, then the source configuration of the block in the right side of the current block will copied (expanded) (But, if the current block is located in the most right side, then the configuration of deleted block will follow the default setting.
JVC VR-609 (10) Press right button, and move the specific block. (11) Press display button, and a yellow bar will be displayed on the left-hand side of a specific block. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 １ (12) Once again, press display button, and a yellow bar will be displayed on the righthand side of 23 (23:59). (13) Press left button, and move it to the position of 18. Press display button, and a yellow bar will disappear.
JVC VR-609 5.2.2.3 Audio Recording ● When you place the bar in AR and press the “Enter” button, then you will be able to select Audio Recording On and Audio Recording off as below. ● Audio Recording On ● Audio Recording Off 5.2.2.4 Setup Days of the Week ● You can select a day to configure the recording schedule using Enter button and Jog dial. 5.2.2.5 Copy Schedule ● You can copy the recording schedule configuration of a specific day of the week to other days of the week.
JVC VR-609 5.2.2.6 Specific Day Schedule ● You can configure the recording schedule of a specific day by pressing “Enter” button in the ‘Specific Days…’. ● If it changes from a menu, a clock mark is displayed on the screen lower right, and it will be in the state of TIMER STANDBY or TIMER RECORD. VR609 does not have a power-saving mode. ● Using the left/right arrow buttons and the ‘Enter’ button and selecting the ‘Add’, you can add and configure new “Specific Day Schedule” up to 16.
JVC VR-609 As each input channel is selected, the maximum recording Field/Sec is changed as in the below table. ( Only for NTSC ) 1CH → 30F/S 2CH → 30F/S 3CH → 15F/S 4CH → 15F/S 5CH → 10F/S 6CH → 10F/S 7CH → 7F/S 8CH → 7F/S 9CH → 6F/S Possible to not be 60 field according to input channel number. Ex) 9CH → 9*6=54(Field), 5CH → 5*10=50(Field), 1CH → 1*30=30(Field) As each input channel is selected, the maximum recording Field/Sec is changed as in the below table.
JVC VR-609 5.2.3 Alarm Recording ● Set-up recording time which is before event and after event when its’ Alarm/Motion Events. ● The RECORD Indication LED and ONSCREEN display might be displayed 10 - 20 seconds longer than actual record time. ● set-up Alarm Input.(1-9) ! If the record is started by alarm / motion detection from the stop mode (the sensor record mode), audio does not record even though it is set to on.
JVC VR-609 ● How to Setup ⓐ Jog direction of field setup. Jog Direction X-axis Direction Button Y-axis Direction Button ⓑ The user field setup is moved to the place by jogging. The first location and the last location can be selected by clicking ENTER. ⓒ Area field setup is moved to the place by jogging and can check the field by using ENTER. ⓓ After setup is finished, move to the higher level menu by clicking EXIT. ● Sensitivity Sensitivity refers to the sensitivity to motion.
JVC VR-609 5.2.
JVC VR-609 5.3 Alarm Setup Alarm Setup is used for connecting with external devices such as alarm or buzzer. 5.3.1. Alarm Name How to Setup a. Select alarm channel by using Jog. b. Selects name by using play, right/left, and jog. c. As jog is rotated from right to left, characters change. Possible to write up to 16 alphanumeric and symbolic characters.
JVC VR-609 5.3.2 Alarm Link Setup Alarm output number Present output number is 1 ● Events : Select condition of Alarm Out. Alarm inputs are 9EA and Alarm outputs are 4EA. ● Alarm Link Explanation The above menu will display as checking Alarm Link button. 1) Alarm (left of the above picture) : Sets up which alarm will be output when alarm occurs. Inputs are 1~9 and possible to select repeatedly. 2) Events (above of right) : Sets up events which will be output alarm signal.
JVC VR-609 5.3.2.2 Events ● Alarm has occurred according to select events such as Disk Full, Admin PW. Changed Video Loss, Motion Detect. ● Checks event you want to detect from the Events menu by using Jog and ENTER button. ● Each event type is indicated by the following. Disk Full : When HDD is fully recorded. Admin.PW Changed : When Admin Password has been changed. Video Loss : No video image. Possible to select channel number or ALL. Motion : When motion is detected.
JVC VR-609 5.4 User Define Screen User can organize the screen to your personal preference by using the user button. It is very convenient if you use AUTO function at User Screen. ● How to Setup 1) Select one of 5 variations of multi-screen views by using left/right buttons or Jog. (NTSC : 5 Screen, PAL : 5 Screen) 2) As color is changed to blue, change the screen by using Button. ⓐ Change the screen, which color is blue, by selecting the Channel Selection button.
JVC VR-609 5.5 Audio Setup ● Audio is capable of recording one channel. ● Sampling Rate is 8 KHz. ● Bypass is possible to Audio Out as recording Audio. ● Master Gain is from 0 to 5. 0 is standard input status. (-5db) ● Audio can be recorded, provided that Audio of Channel Selection at Recording Setup is checked Caution!! Cannot record Audio at the time Recording Quality is set to "7". ● How to Setup 1) Selecting Audio Setup from the menu, displays the above picture. 2) Select “Bypass Audio”.
JVC VR-609 5.6 Menu Setup VR-609E VR-609U ● Language is set-up at English and able to change to French and Spanish on VR-609U. (English, German, French, Spanish, Italian, Portuguese, Chinese are available on VR-609E) ● Status : It controls transparency of present status( channel name, recording status indicator, clock, indicator of HDD recording amount ) which is displayed on screen. (0 ~ 80%) ● Menu : It controls transparency of Menu screen.
JVC VR-609 5.7 System Setup You can check all of the product motion. Select Main/Backup HDD. Checks Alarm Log. Back up data by using HDD. set-up motion contents of Auto button. set-up Spot Output and VGA Output. Network Setup, Date/Time Setup, Admin Password, Web Password, Update Program Check system version. 5.7.1 System Log ● Log records all actions which occurred on the system while operating. ● Easy to use by using Date or Filter.
JVC VR-609 ● How to Setup 1) Log records all actions which occurred on the system while operating. 2) You can check “Log” by the following : ① Set-up start date, which will be marked on the LOG, by Jog. Select year/month/day by using the right/left button. Change year/month/day number by using Jog. ② Select “Log Filter” for quick search. ③ Select “Display” button.
JVC VR-609 5.7.3 HDD Management The state of the 1st Builtin HDD. Capacity is 120GB, and Free Space is 120GB The state of the 2nd Built-in HDD. The state of the removable HDD. ● set-up HDD Main HDD : Can be used for basic REC. Backup : For backup HDD. ● set-up REC mode of the main HDD. ● set-up overwrite mode. ● Log clear function. ● set-up HDD using percent. ■ Clear All Previous Log If you check here, and press EXIT button, "Do you want to Update Disk?" is displayed.
JVC VR-609 ● HDD Information ● This is for information of Local HDD. ● This is for information of external IEEE 1394 HDD. As clicking the "Indicate" button, you can know which HDD is. ! Please turn off the power when you connect external IEEE1394 or USB with DVR for the purpose of avoiding damage. After power off, connect IEEE1394 or USB device and then turn on the power. ! If you reset DVR, you have to power off the IEEE 1394 or USB device.
JVC VR-609 ● It is displayed when HDD is almost full. ● How to Setup New HDD 1) Add new HDD. ① When adding a new HDD, you must turn the power off. ② Backup HDD is only one. ③ It is better to clear the data when an HDD is registered for the first time. MAIN IDE1 : Master (Internal HDD) MAIN/ BACKUP IDE1 : Slave (Internal HDD) ! IDE2 : Slave (Removable HDD) Notice If you make a mistake during HDD installation or removal, HDD contents can be erased. ( Ex.
JVC VR-609 2) Overwrite Disk When Disk Full Monitor screen displays a similar message as the following according to overwrite on/off. On Main HDD is full, it starts to overwrite old DATA. Off When Main HDD is full (100%), recording is stopped. 3) Clear All Previous Log. It is the place for initial Log content. It is better to initiate Log, when HDD or DATA is changed. ! To make back-up with CD-RW etc should be strongly recommended if the important data seems to be recorded.
JVC VR-609 5.7.4 Backup ● Record a portion of the main HDD content to a Backup HDD. ● Must have more than one Backup HDD and recording content of setup date. ● Possible to backup HDD and CD. ● How to Setup 1) Set-up start and end dates by using Jog and the right/left button. 2) Select Backup and backup will start. It is possible for this to take a long time depending upon the motion contents of the system. 3) If there is no data to backup, “Out of backup range” message will display.
JVC VR-609 ●This message is displayed if there is no CD-recorder when backup at CD. ● This message warns that recording is stopped while data is being backed up to a CD-RW. ● This message is displayed if there is no CD for backup when backup at CD. ● This message is for warning the data of CD could be lost while erase CD. ● Decide whether you back up or not after check. ● It means Backup is being progressed ● This is warning message cancellation will damage the CD while it is being backed up.
JVC VR-609 ● How to connect removable HDD The jumper of HDD which connects additionally, set-up as slave. (Refer to HDD’s user manual for setup jumper.) Separate inside rack from hard rack. Open inside rack and push top cover. Connect data cable of the inside rack with the power line exactly. Close the cover of the inside rack. ! If Removable HDD is set-up for backup, this HDD’s contents are not be able to replay from the remote place.( Monitoring is possible.
JVC VR-609 5.7.5 Auto Select ● Select Delay and Skip of the Auto Switch. ● How to Setup 1) 2) 3) 4) Auto Select function is for automatic switchover of the Monitor screen. Delay of the Auto Switch range is 1 ~ 300sec. All Channels are On when the system starts for the first time. When select Skip Video Loss Channel, no signal channel is not displayed in case of sequence which is displayed only one channel. 5) Auto Select of User Define is automatically switching by mode switching.
JVC VR-609 5.7.6 Video Output ● Select the Spot Out channel. ● Select VGA output.( If you check the VGA output, monitor screen quality is worse than before.) ● If there is no VGA output on the VGA output port, press the STOP button and DISPLAY button at the front button for about 3sec then VGA output will be on automatically. ● How to Setup 1) Select what you want to change by using up/down buttons or Jog. 2) When you select Monitor Out, the Spot Out port is the same as the Monitor Out.
JVC VR-609 5.7.7 Administration This is for remote security. set-up date and time. This is for Setting password. This is for setting web password. Covert Channel allows Administrator to select channels that only they can view. DVR will send an Email upon events selected during set-up. This is for locking front button. This is for locking remote controller. 5.7.7.1 Network Setup ● You should install the following items for remote search and control by LAN.
JVC VR-609 ● How to Setup 1) Move to the place you want to change the setup by using Jog. 2) Select contents to change by using the ENTER button. 3) Select place to change by using the right/left button. 4) Select the number you want by using Jog. IP Address : ______.______.______.______ Subnet Mask : ______.______.______.______ Gateway : ______.______.______.______ DNS : ______.______.______.______ Web Server Port Number : ____ ! Notice (Possible to have a Network problem when its installation.
JVC VR-609 5.7.7.2 Date/Time Setup ● Set-up Date and Time, which will be used in the system. ● Set-up “Date Display”. ● How to Setup 1) Move to the place you want to change the setup by using up/down buttons or Jog. 2) Select contents to change by using the ENTER button. 3) Select the place to change by using the right/left button. 4) Select the number you want by using Jog. Date (year/month/day) : ______.______.______ Time (hour/minute/second) : ______.______.______ 5) Select the type of display.
JVC VR-609 5.7.7.3 Password ● ● ● ● You can use a password for system security. Password mode will display as click the check box. The password must 4 digit numbers. Enter “New Password” and “Confirm” through Channel Selection buttons. Please use the each 1-9 Channel Selection button. ● Setup : Setup menu, PTZ : Control camera, REC : Recording PB : It means playback.
JVC VR-609 ● It is displayed if there is no User ID. ● It is displayed if there is User ID. Please input a password after choosing a user name. ● This message is displayed when enter “MENU” after setting password. ● Enter the Password. ● If you input wrong password, you can not enter the MENU. If you input wrong password 3 times, MENU screen will disappear. To input password again, please press the MENU button. ! If you operate quickly, possible to miss Master Password. Please be careful.
JVC VR-609 ● How to Setup 1) Check the box to activate passwords. 2) Select a new password and then enter again for confirmation. 3) Select a new password by using Jog. 4) Enter “New Password” and “Confirm” through Channel Selection buttons. Please use the each 1-9 Channel Selection button. 5) As “Setting” select, password is changed. ! Notice If you forget the password, you can not operate the system! Please be sure to remember the password or write it down in a secure place. 5.7.7.
JVC VR-609 5.7.7.5 Covert Channel ● Covert Channel Selection should be setup to use password. ● The selected channel at Monitor/Playback is only possible to record and live screen or playback screen is displayed with V-Loss. If you want to see playback screen, you must use Administrator Password. ● The selected channel from the Web is not able to see live or playback screen through the Web. ● It is not reflected in SPOT OUT. 5.7.7.
JVC VR-609 ● Events :DVR will send an email when any of the checked events occur. ● Conditions : It sends email at Start and End time as setup. 1) Start/End : Defines the time interval during which emails will be sent based upon the selected events. 2) Every (Time): Defines that every time a selected event occurs an email will be sent every hour of time. 3) Every (Events): Defines that every time a selected event occurs an email will be sent regardless of time.
JVC VR-609 ● An 8 character ID may be selected to identify a recipient. ● Email address are entered into the menu and can include up to 128 characters. 5.7.7.7 Lock Front Button ● Lock Front Button : This selection will lock the front panel buttons to prevent unauthorized operation. Only the Menu and Operation button will operate. ● When you press the LOCKED button, the message is displayed on "the button is locked" for a moment. 5.7.7.
JVC VR-609 5.7.9 Default in Setup Menu Camera Setup Name : Not installed Control ID : the same as a camera No.
JVC VR-609 5.8 Monitor Display ● Recording Status ( According to color ) 1) GREEN : Camera is Recording. (Always recording) 2) RED 3) BLUE : It means it is being Event recording by motion detection or alarm input. : It means DVR is on monitoring. (No recording, just for monitoring) 4) WHITE : No input signal status.
JVC VR-609 5.9 Playback ● The above picture will be displayed by pressing the PLAY Button. ● How to Setup 1) Please enter the date and time. 2) Press "Play Start", the playback screen is displayed according to the date value. The menu button can be used as a shortcut key of the "Play Start" button. The PLAYBACK starts without cursor position. ・Play Audio : You can listen to the recorded audio if input. ・Auto Repeat : After completing playback, picture returns to the first playback screen automatically.
JVC VR-609 ● Motion by Mix Button If you press the Display button and Mode button (Image Sequence, Triplex) during the play mode, the screen format is displayed with Multi/Image Sequence/Triplex. 1) DISPLAY : Recording channel is displayed with a 1/4/9 screen. Because “Multi” is able to check several channels simultaneously, it is useful to search quickly. 2) IMAGE SEQUENCE : Multiple images from a single camera are displayed in order in which they were recorded in a 9 image screen format.
JVC VR-609 5.10 Power Off ● You can power off by using the front operate switch. ! If system is to not be used for long periods of time, turn off the rear panel power switch. If the rear power switch is in the on position, DVR will reboot after a power failure. ! You must wait at least 15 seconds after shut down before removing the removable HDD.
JVC VR-609 6. External Backup 6.1 External USB Port 6.1.1 Connect with External USB Port USB1.1 port will allow you to connect to a FDD, Zip Drive or USB memory device to record still images from the DVR. 6.1.2 How to Backup Connect with external USB port after selecting the image in full screen mode. If there is power on, please turn off the power then connect with USB device. backup is done at USB FDD. Format FDD. ● How to Setup 1) Pause the full screen after playback you want to backup.
JVC VR-609 6.2 External IEEE 1394 Port 6.2.1 Connect with External IEEE 1394 Port The IEEE1394 port is used to connect to external devices as a HDD or CD-RW drive to back-up images. 6.2.2 How to Connect with IEEE 1394 Port Connect with external IEEE1394 port as blow picture. If there is power on, please turn off the power then connect with IEEE1394 device.
JVC VR-609 7. Remote Controller 7.1 Outline ① ② ③ ④ ⑤ ⑦ ⑥ ⑧ ⑨ ⑩ ! For the first step, you should give an ID for control DVR by one remote controller. 1) Press one of INPUT button (1~9) and STOP on DVR at the same time then the number which you pressed will be the ID. 2) Press INPUT button (1~9) on remote controller for 3 seconds then remote LED on front panel of DVR will be flickered. 3) This DVR has ID by pressed button number. Make sure there is no same ID as using several DVR.
JVC VR-609 7.2 Details ① ② ● REC Button : When the REC LED is on, DVR is recording as per set-up instructions. ● ALARM RESET Button : Stops the Alarm Output. ③ ④ ⑤ ● INPUT Button :These buttons are used to select the screen monitors and to change the channel settings at the menu. If you want to change channel, press 01,02,03,…09. ● AUTO Button : The Input channel is automatically switched in proportion to the speed setting at the menu.
JVC VR-609 ● MENU : This button is for selecting or canceling the monitor setup menu mode. ⑦ MULTI : This button is for canceling Image Sequence or Triplex mode. TRIPLEX : To see live and PB screen at the same time as making replay screen to PIP mode. IMAGE SEQUENCE : Changes playback mode to sequence of images from single camera. ENTER : For applying setting value. Up/Down/Left/Right Button : For moving Menu to Menu.
JVC VR-609 ● Working Range of Remote Controller Signal Receiver Within 6m 30° Supports to use as below. ( Standard DVR receiver) · Distance : within 6m Angle : within 30˚ 30° ! Do not leave any material near the signal receiver between remote controller and DVR. Remote controller could not be controlled as closing direct light or strong lighting. Do not press DVR and remote controller’s buttons at the same time. Disorder is possible. ･Guide on battery replacement.
JVC VR-609 8. Troubleshooting Symptom Cause Action Power cannot be turned on. ● Is the power cable properly connected? ● Plug the supplied power cable to the outlet [REC] and [PLAY] buttons do not work. ● Is the Operation Lock turned on? ● Turn off the Operation Lock REC cannot be started even if pressing [REC] button. ● Is it in the state of Timer Standby? ● Remove the check of "schedule recording". Playback image is not displayed on the monitor.
JVC VR-609 9. Specifications Parts Item Number of Channels Q’ty (EA) Camera Input Signal Video Signal VR-609 U/ E 9 NTSC Signal Input Input Signal Processor Composite 1.0V With Loop Output, BNC Compression Type Wavelet based Resolution (H*V) 720*240 Compression Monitor Output (Composite) Monitor Output (Y / C) PAL 720*288 7 Mode Q’ty (EA) 2 Video Level (Vp_p) 1.0 1.0 Burst Level (Vp_p) 0.286 0.3 Q’ty (EA) 1 Y Level (Vp_p) 1.0 1.0 C Level (Vp_p) 0.286 0.
JVC VR-609 Alarm Control Alarm Input 9EA, Low Active Alarm , TTL Level Alarm Output 4 EA, Low Active Alarm, TTL Level Open collector Output Mode Alarm Input, V-loss, Motion, Disk Full, Admin-PW Changed Log Display Date & time, CH, Name, Event Mode & Grid Full/Grid(16H*12V) Sensitivity 10 Step Velocity 10 Step Network & Camera Control Part Serial I/O Port RS-485 (1EA):3P Terminal LAN 1EA, Ethernet 10/100M , RJ-45P Record Processor Mode Time-Lapse/Motion/Alarm Motion detect Recording
JVC VR-609 14 431 88 10 432 11.5 unit : mm ! Specifications and appearance of this unit are subject to change for improvement without prior notice.
VR-609 DIGITAL VIDEO RECORDER is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
