Security Camera User Manual

19
Connect the camera to a hub or computer using
a LAN cable.
䡵 When connecting to a hub
Make use of a straight cable.
䡵 When connecting to a computer
Make use of a cross cable.
Caution:
● However, cross cables cannot be used with
some computer models. When connecting
VN-V25U/26U directly to a computer, check
the computer’s LAN specifications in
advance.
Note:
● Make use of a Category 5 (or higher) cable
when 100BASE-TX is used.
● To distribute images to the network, set the
[MONITOR OUT] switch at the side of this
product to AOFFB.
This terminal is used for adjusting the camera
angle during installation. Connect it to devices such
as a video monitor using a video cable (RCA).
Caution:
● A longer cable extension distance causes
signals to be attenuated, image resolution to
deteriorate and noise to increase.
Note:
● Select the signal system for the monitor output
using the [MONITOR OUT] switch at the side of
this product. (
A NTSC B or A PAL B )
After adjusting the camera angle, set the switch
to
A OFF B . After changing the switch settings,
press the Reset button to reboot the camera.
Connect to the speakers with a built-in amplifier,
etc. using mini jack (R3.5 mono) cable.
LAN Cable Connection
Cable to use
● Shielded cable
● Length of 100 m or shorter
CAUTION
: NEVER USE
PoE
AND
AC 24V
AT THE SAME TIME
DO NOT CONNECT TO THE TELEPHONE NETWORK
SEE INSTRUCTION MANUAL
CLASS2ONLYFORUSA ISOLATED POWER ONLY FOR EUROPE AND OTHER
MONITOR
OUT
10BASE-T/
100BASE-TX
PUSH
OUTPUT
INPUT
2
AC24V
1
PoE
G 2121
ALARM
CAUTION
: NEVER USE
PoE
AND
AC 24V
AT THE SAME TIME
DO NOT CONNECT TO THE TELEPHONE NETWORK
SEE INSTRUCTION MANUAL
CLASS2ONLYFORUSA ISOLATED POWER ONLY FOR EUROPE AND OTHER
MONITOR
OUT
10BASE-T/
100BASE-TX
PUSH
OUTPUT
INPUT
2
AC24V
1
PoE
G 2121
ALARM
STATUS
MONITOR OUT
IRIS
PA L OF F NT S C
RESET
[MONITOR OUT] Switch
Monitor Signal Output Terminal
Connection
Connecting the audio signal
output terminal ( VN-V26U only )
CAUTION : NEVER USE PoE AND AC 24V AT THE SAME TIME
DO NOT CONNECT TO THE TELEPHONE NETWORK
SEE INSTRUCTION MANUAL
CLASS2ONLYFORUSA ISOLATED POWER ONLY FOR EUROPE AND OTHER
MONITOR
OUT
10BASE-T/
100BASE-TX
PUSH
OUTPUT
INPUT
2
AC24V
1
PoE
G 2121
ALARM
CAUTION
: NEVER USE
PoE
AND
AC 24V
AT T H E S A M E T I ME
DO NOT CONNECT TO THE TELEPHONE NETWORK
SEE INSTRUCTION MANUAL
CLASS 2 ONLY FOR USA ISOLATED PO
WER ONL
Y
FOR EUR
OPE AND O
THER
MONITOR
OUT
AUDIO OUT
10BASE-T/
100BASE-TX
PUSH
OUTPUT
ALARM
INPUT
2
AC24V
1
PoE
G
2121
VN-V25U_26U_EN.book Page 19 Monday, January 21, 2008 10:13 AM