Box Type Network Camera Instructions

44
Setting Using Internet Explorer
Basic Page (continued)
Setting (continued)
A IP Seting For setting the DHCP client function.
Ensure to connect VN-C20 to a network environment with a DHCP server
when enabling the DHCP settings.
If the DHCP server does not exist when DHCP is set to AEnableB, VN-C20
will start running with the 192.168.0.2 IP address and 255.255.0 subnet
mask in about 2 minutes after startup.
Refer to [IP Address Settings] (A Page 21) for the IP address.
B IP Address For setting the IP address of VN-C20.
C Subnet Mask For setting the subnet mask of VN-C20.
D Default Gateway For setting the default gateway of VN-C20.
Set as 0.0.0.0 when a default gateway is not set.
E Host Name For setting the host name of VN-C20.
Specify name using alphanumeric characters, hyphen (-) or period (.).
Underscores (_) cannot be used.
F Domain Name For setting the domain name.
Specify name using alphanumeric characters, hyphen (-) or period (.).
Underscores (_) cannot be used.
G DNS Server For setting the address of the DNS server.
H MAC Address The MAC address of VN-C20 is displayed in a hexadecimal number.
VN-C20_EN.book Page 44 Tuesday, February 14, 2006 10:51 AM