Box Type Network Camera Instructions

16
Connection / Installation
Connect the camera to a hub or computer using
a LAN cable.
Use the shielded cable for connections.
䡵 When connecting to a hub
Make use of a straight cable.
䡵 When connecting to a computer
Make use of a Cross Over cable.
Caution:
● However, cross cables cannot be used with
some computer models. When connecting
VN-C20 directly to a computer, make sure to
check the computer's LAN specifications in
advance.
Note:
● Make use of a Category 5 (or higher) cable in
the case of 100BASE-TX.
Connect to a video monitor, etc. using a coaxial
cable.
Note:
● The video output signal is NTSC.
䢇 Video signal cable (coaxial cable)
● See below for the connection
distance.(Reference value)
Caution:
● A longer cable extension distance causes
signals to be attenuated, images to
deteriorate and noise to increase.
LAN Cable Connection
CLASS 2 ONLY For USA ISOLA TED POWER ONLY For EUROPE and OTHER
CAUTION: Do not use
PoE and AC24V together
POWER
VIDEO OUT
10BASE - T / 100BASE - TX
G
2
1
2
121
ALARM
OUTPUT
PoE
INPUT
AC24V
PUSH
DO NOT CONNECT TO THE
TELEPHONE NETWORK
For USA
Video Signal Output
Terminal Connection
Maximum
extension (m)
200 350 450
Cable to use RG-59 RG-6 RG-11
CLASS 2 ONLY For USA ISOLA TED POWER ONLY For EUROPE and OTHER
CAUTION: Do not use
PoE and AC24V together
POWER
VIDEO OUT
10BASE - T / 100BASE - TX
G
2
1
2
121
ALARM
OUTPUT
PoE
INPUT
AC24V
PUSH
DO NOT CONNECT TO THE
TELEPHONE NETWORK
For USA
VN-C20_EN.book Page 16 Tuesday, February 14, 2006 10:51 AM