Box Type Network Camera Instructions

14
Connection / Installation
Electricity can be supplied to this product either
by using the PoE or connecting to the AC24 V
power supply.
䢇 When electricity is supplied to the camera,
the power indicator lights up for a moment,
starts blinking during startup, and lights up
when startup is complete.
Caution:
● Make sure to select only one mode of
electrical supply. Connecting the power cord
and the LAN cable for the PoE at the same
time may result in failure or malfunction of the
camera.
Using the PoE
Connect to a device that supports PoE and
supply electricity from the LAN cable.
Note:
● For details on the connection method and
cable type, please refer to ALAN Cable
ConnectionB (APage 16).
Power Connection
CLASS 2 ONLY For USA ISOLA TED POWER ONLY For EUROPE and OTHER
CAUTION: Do not use
PoE and AC24V together
POWER
VIDEO OUT
10BASE - T / 100BASE - TX
G
2
1
2
121
ALARM
OUTPUT
PoE
INPUT
AC24V
PUSH
DO NOT CONNECT TO THE
TELEPHONE NETWORK
For USA
Power
indicator
Connect to
PoE-
compatible
device
What is PoE (Power over Ethernet)?
This is a function that enables operation of a
LAN equipment without a power cable by
supplying power simultaneously with the data
using a LAN cable.
VN-C20_EN.book Page 14 Tuesday, February 14, 2006 10:51 AM